摘要
针对某型矿用防爆车辆原始橡胶减振器频繁损坏及人员、车辆"双重损伤"问题,利用SolidWorks软件的三维设计优势、ABAQUS软件非线性求解的专业性,完成了改进型"抬轿"式橡胶阻尼减振装置的设计。通过计算橡胶材料的特性系数C01、C10等,并且通过仿真分析后,其最大静变形量为0.84mm。所设计装置经实车及工业性试验,使用效果良好,并已批量应用于该型车辆减振系统中,也为同类非标减振设计提供了借鉴。
In view of the frequent damage of the original rubber shock absorber of a mine explosion-proof vehicle and the“double damage”of personnel and vehicles,the design of the improved“lift car”type rubber shock absorber was completed by using the three-dimensional design advantages of SolidWorks software and the specialty of ABAQUS software nonlinear solution.By calculating the characteristic coefficients C01 and C10 of rubber material,the maximum static deformation was 0.84mm.The designed device has been tested in real vehicle and industry,and has been applied in this type of vehicle damping system in batches.It also provides a reference for similar non-standard damping design.
作者
高北雄
韩斌慧
王仕杰
原彩霞
GAO Bei-xiong;HAN Bin-hui;WANG Shi-jie;YUAN Cai-xia(School of Aeronautical Maintenance Engineering,Xi'an Aeronautical Polytechnic Insititute,Xi'an 710089,Shaanxi,China;School of Mechanical Enginering,Taiyuan University of Science and Technology,Taiyuan 030024,Shanxi,China;China National Heavy Machinery Research Institute Co.Ltd.,Xi'an 710032,Shaanxi,China;Shanxi Aero Engine Maintenance Co.,Ltd,Aero Engine Corporation of Jincheng,048000,Shanxi,China)
出处
《合成材料老化与应用》
2020年第4期43-46,共4页
Synthetic Materials Aging and Application
基金
国家自然科学基金项目(51805347)。
