摘要
发电机原有的主保护装置(型号YH-B5081D)通过工业以太网连接上位机,采用IEC 60870-5-103规约,结合UDP报文和TCP报文建立连接与通信,对发电机的运行和控制实施计算机监控。正常状态下,监控系统只需定时向保护装置发送UDP广播报文;当保护装置发生事件或有数据变化时,保护装置启动数据传输,通过TCP报文及时将信息通知上位机的监控系统,完成对小型电站的技术升级,实现“无人值班,少人值守”工作目标。
The original main protection device of the generator(model YH-B5081D)was connected to the host computer through industrial Ethernet adopting the IEC 60870-5-103 protocol.Combining UDP message and TCP message to establish connection and communication,the operation and control of generator were monitored by computer.Under normal conditions,the monitoring system only needed to periodically send UDP broadcast messages to the protection device.When an event or data change occurred in the protection device,the protection device initiated data transmission,and informed the monitoring system of the host computer through TCP messages in a timely manner to complete the technical upgrade of the small power station and realize the work of"unattended,less on duty"aims.
作者
韦宇
莫仕勋
WEI Yu;MO Shixun(School of Electrical Engineering of Guangxi University,Nanning 530004,China)
出处
《电工技术》
2020年第13期94-96,100,共4页
Electric Engineering
关键词
以太网
103规约
保护装置
网络通信
Ethernet
103 protocol
protection device
network communication