期刊文献+

用于地面模拟平台测试光学相机的设计

Design of Optical Camera for Ground Simulation Platform Test
下载PDF
导出
摘要 航空相机检测设备在出厂前需要更高精度相机调试,设计了一种应用于航空相机检测设备-地面模拟平台调试的相机。该相机通过使用非球面镜提高相机的图像质量并减轻整体重量,要达到相同成像效果的球面镜组需要8片透镜,使用非球面镜减轻了相机的重量和体积,设计的光学系预期统焦距为80 mm,最终光学系统的MTF优于34%@91 lp/mm。投入加工并组装相机测试,测试结果表明,非球面镜片达到制造标准,相机的分辨率、成像清晰度和焦距均符合设计要求。 With the development of technology and the advancement of processing and inspection technology,the requirements for aerial camera inspection equipment are becoming higher and higher.Therefore,aerial camera inspection equipment requires higher precision camera debugging before leaving the factory.Thus,an application for aerial camera inspection equipment-camera was designed for debugging on the ground simulation platform.The camera used aspheric mirrors to improve the image quality of the camera and reduce the overall weight.To achieve the same imaging effect,the spherical lens group required eight lenses.The aspheric mirrors were used to reduce the weight and volume of the camera.The designed optical system was expected to have a focal length of 80 mm.The modulation transfer function(MTF)of the final optical system was better than 34%@91 lp/mm.It was put into processing and assembling camera testing.The test results show that the aspheric lens meets the manufacturing standards.The camera resolution,imaging clarity and focal length all meet the design requirements.
作者 荆丹 杨振 谷岩 林洁琼 周晓勤 JING Dan;YANG Zhen;GU Yan;LIN Jie-qiong;ZHOU Xiao-qin(Mechanical and Electrical Engineering Institute,Changchun University of Technology,Changchun 130000,China;Mechanical and Aerospace Engineering Institute,Jilin University,Changchun 130000,China)
出处 《科学技术与工程》 北大核心 2020年第21期8557-8562,共6页 Science Technology and Engineering
基金 国家重点研发计划(2016YFE0105100) 吉林省科技厅项目(20140622008JC) 吉林省科技发展计划重点项目(20190302065GX)。
关键词 测试相机 光学系统 像质优化 非球面镜 test camera optical system image quality optimization aspherical mirror
  • 相关文献

参考文献6

二级参考文献41

共引文献66

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部