期刊文献+

基于载波实现的多电平SVPWM调制策略 被引量:2

An Multilevel SVPWM Implementation Based on Carrier Modulation
下载PDF
导出
摘要 为了降低多电平电压空间矢量调制(SVPWM)在实际应用中的复杂性,改善多电平变换系统的实时性.通过结合载波移相和载波层叠两种调制策略的优点,提出一种基于载波实现多电平SVPWM调制策略,不仅能够提高直流利用率,减小输出电压谐波成分,而且能大幅改善算法的计算复杂度,并且计算量不会随着电平数的增多而增加,因此可以方便扩展至任意电平.此外,新的调制策略可以保证单元箱之间的功率均衡,维持现有多电平结构中模块化的优点.最后,通过仿真和实验,验证了本文提出调制策略的有效性. In order to reduce the complexity of multilevel voltage space vector modulation(SVPWM)in practical implementation,and improve the real-time performance of multilevel converter system,in this paper,by combining the advantages of phase shift pulse width modulation(PS-PWM)and carrier disposition PWM(PD-PWM),a novel multilevel SVPWM implementation based on carrier configuration is proposed,which can improve the utilization of the DC voltage,reduce the total harmonic distortion(THD)of the output and improve the time complexity of the algorithm,which means the novel algorithm can be easily applied to any level cascaded H bridge converters.In addition,the novel algorithm ensures the power balance between each unit,which keeps the advantage of the modular design.Finally,the effectiveness of the proposed modulation strategy is verified by simulation and experiment.
作者 肖牧轩 欧阳红林 朱颖达 何志兴 汪亮 毛学魁 XIAO Muxuan;OUYANG Honglin;ZHU Yingda;HE Zhixing;WANG Liang;MAO Xuekui(College of Electrical Engineering,Hunan University,Changsha 410082,China;State Grid Beijing Haidian Electric Power Supply Company,Beijing 100195,China)
出处 《湖南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2020年第8期82-95,共14页 Journal of Hunan University:Natural Sciences
基金 国家自然科学基金资助项目(51677063)。
关键词 电力电子 PWM变换器 多电平载波调制 功率均衡 power electronics PWM converters multilevel carrier modulation power balance
  • 相关文献

参考文献11

二级参考文献123

  • 1李建林,李晶,王立乔,赵栋利,张仲超,许洪华.CPS-SPWM在级联型有源电力滤波器中的应用[J].电力系统自动化,2006,30(9):64-68. 被引量:16
  • 2顾和荣,杨子龙,邬伟扬.并网逆变器输出电流滞环跟踪控制技术研究[J].中国电机工程学报,2006,26(9):108-112. 被引量:174
  • 3王立杰,孙玉坤,孙运全,刘永敏.大容量链式STATCOM的三角载波移相-开关频率最优PWM法控制策略的研究[J].继电器,2007,35(3):41-44. 被引量:16
  • 4李建林,许鸿雁,高志刚,赵斌,许洪华.级联H桥五电平变流器工况分析与验证[J].电工技术学报,2007,22(4):85-91. 被引量:23
  • 5Lesnicar A, Marquardt R. An innovative modular multilevel converter topology suitable for a wide power range[C] // Power Tech Conference Proceedings, 2003 IEEE Bologna, 2003, 3: 23-26.
  • 6Glinka M, Marquardt R. A new AC/AC multilevel converter family[J]. IEEE Transactions on Industrial Electronics, 2005, 52(3): 662- 669.
  • 7Yazdani A, Sepahvand H, Crow M L, et al. Fault detection and mitigation in multilevel converter STATCOMs[J]. IEEE Transactions on Industrial Electronics, 2011, 58(4): 1307-1315.
  • 8SONG Wen-chao, HUANG A Q. Fault-tolerant design and control strategy for cascaded H-bridge multilevel converter-based STATCOM[J]. IEEE Transactions on Industrial Electronics, 2010, 57(8): 2700-2708.
  • 9Lezana P, Ortiz G, Rodriguez J. Operation of regenerative cascade multicell converter under fault condition[C] // Control and Modeling for Power Electronics, 2008. COMPEL 2008. 1 lth Workshop on, 2008: 1-6.
  • 10Lezana P, Ortiz G Extended operation of cascade multicell converters under fault condition[J]. IEEE Transactions on Industrial Electronics, 2009, 56(7): 2697-2703.

共引文献164

同被引文献20

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部