期刊文献+

基于主成分回归的苹果可溶性固形物含量预测模型 被引量:8

Prediction Model for Soluble Solids Content of Apples Based on Principal Component Regression
下载PDF
导出
摘要 为了更好地预测苹果的可溶性固形物含量(SSC),试验采用反射式光谱采集系统获取采后"富士"苹果的光谱反射率。分析了3种光谱预处理方法(标准正态变换、多元散射校正以及二阶导数)对预测模型的影响;利用主成分分析方法对预处理后的光谱数据进行降维,并基于选取的特征变量建立预测苹果SSC的回归模型。结果表明:采用主成分分析方法从全光谱的1 024个波长中选取了前23个主成分得分作为特征变量;基于特征变量建立的回归预测模型具有较好的预测能力,其预测集相关系数R_P=0.908,均方根误差RMSEP=0.499。这表明采用光谱技术结合主成分回归预测苹果SSC是可行的。 In order to predict soluble solids content of apples,spectra acquisition system was used to collect the spectral reflectivity of postharvest apples.Then the influences of three spectral pretreatment methods including standard normal variation,multi-scatter calibration and second derivative on the prediction model were analyzed.And principal component analysis was used to conduct data mining from preprocessing reflectance spectra.And regression model was established based on selected characteristic variables for predicting SSC of apples.The results showed that,the first 23 principal components were selected as the characteristic variables by principal component analysis from 1024 wavelengths.The regression model based on selected characteristic variables had the best prediction ability(RP=0.908,RMSEP=0.499).Therefore,it is feasible to predict SSC of apples by spectral technology combined with principal component regression.
作者 孟庆龙 尚静 黄人帅 张艳 MENG Qing-long;SHANG Jing;HUANG Ren-shuai;ZHANG Yan(Food and Pharmaceutical Engineering Institute,Guiyang University,Guiyang 550005,China;The Research Center of Nondestructive Testing for Agricultural Products,Guiyang University,Guiyang 550005,China)
出处 《保鲜与加工》 CAS 北大核心 2020年第5期185-189,共5页 Storage and Process
基金 国家自然科学基金项目(61505036) 贵州省科技计划项目(黔科合基础[2020]1Y270) 贵州省普通高等学校工程研究中心项目(黔教合KY字[2016]017) 贵阳学院科研资金资助(GYU-KY-[2020])。
关键词 光谱技术 苹果 可溶性固形物含量 主成分回归 spectral technology apple soluble solids content principal component regression
  • 相关文献

参考文献12

二级参考文献139

共引文献205

同被引文献63

引证文献8

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部