期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

MPDB及ODB壁障动静态力学响应对比分析 被引量：1

Comparative Analysis of Dynamic and Static Mechanical Responses between MPDB and ODB
下载PDF
导出
摘要 MPDB(移动渐进变形壁障)碰撞试验是兼容性考察工况,E-NCAP及C-NCAP将分别在2020年及2021年引入该工况取代ODB(可变形壁障)碰撞试验,由于工况更新,壁障由原来的ODB壁障改为MPDB壁障。2种壁障完全不同,文章对2种壁障进行了对比,分别建立动静态压溃模型,得到了壁障在不同载荷下的响应曲线,对壁障的比较研究可以为后续车型开发提供参考和指导。 The MPDB(moving progressive deformable barrier)crash test is a compatibility inspection condition.E-NCAP and C-NCAP will use MPDB crash test to replace ODB test in 2020 and 2021 respectively.Due to the updating of the working conditions,the barrier will be changed from the original ODB to MPDB.The two kinds of barriers are completely different.This paper compares the two kinds of barriers,establishes the dynamic and static crushing models respectively,and obtains the response curves of barriers under different loads.The comparative study of the barriers can provide reference and guidance for the subsequent vehicle development.
作者 王晓平 WANG Xiaoping
机构地区 中国第一汽车股份有限公司天津技术开发分公司
出处 《汽车工程师》 2020年第9期48-50,共3页 Automotive Engineer
关键词 MPDB ODB 静态 动态 MPDB ODB Static Dynamic
分类号 U467.14 [机械工程—车辆工程]
  • 相关文献

参考文献3

二级参考文献50

  • 1GB/T20913-2007.乘用车正面偏置碰撞的乘员保护[S].
  • 2王永宁,李大永,Pierre Culiere.汽车偏置前撞试验用渐变强度可变形壁障的有限元模型[J].汽车工程,2007,29(10):847-850. 被引量：2
  • 3United Nations Economic Commission for Europe. ECE Regulation No.94, Uniform provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a frontal collision [S/OL]. [1998-mm-dd]. 1998. http://www.unece.org/trans/main/ wp29/wp29regsl-20.html.
  • 4Wierzbicki T. Crushing analysis of metal honeycombs [J]. Int'l J Impaet Eng, 1983(1): 157-74.
  • 5Gibson LJ, Ashby ME Cellular Solids: Structure and Properties [M]. London: Cambridge University Press, 1999.
  • 6BAI Zhonghao, GUO Hourui, JIANG Binhui, et. al. A study on mean crushing strength of hexagonal multi thin- walled structures [J]. Thin-Walled Strue, 2014, 80: 38-45.
  • 7Asadi M, Walker B Shirvani H. The investigation to compare the application of shell and solid element honeycomb model in ODB [C]//7th Euro LS-DYNA Conf, Salzburg, MAY 2009.
  • 8Tryland T. Alternative models of the offset and side impact deformable barriers [C]//9th Int'l LS-DYNA Users Conf, Norway, 2006.
  • 9ZHOU Qing, Mayer R R. Characterization of aluminum honeycomb material failure in large deformation compression, shear, and tearing [J]. ASME, 2002, 124: 412-420.
  • 10Zhou Qing,RR Mayer. Characterization of Aluminum Honeycomb Material Failure in Large Deformation Compression,Shear,and Tearing[J].ASME Journal of Engineering Materials and Technology,2002.412-420.

共引文献12

引证文献1

二级引证文献1

汽车工程师
2020年 第9期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部