期刊文献+

半再生催化重整催化剂SR-1000在玉门炼油厂的工业应用 被引量:5

INDUSTRIAL APPLICATION OF REFORMING CATALYST SR-1000
下载PDF
导出
摘要 中国石化石油化工科学研究院研制的半再生催化重整催化剂SR-1000在中国石油玉门油田分公司炼油化工总厂450 kt a重整装置上进行了工业应用。近400天的运行结果表明,在较低的加权平均床层反应温度(WABT,468℃)下,催化重整反应所得C 5+稳定汽油辛烷值RON为94.0,收率为89.2%,说明SR-1000催化剂具有较好的活性、选择性。在原料性质及反应苛刻度基本相同的情况下,SR-1000催化剂性能优于PRT-C PRT-D重整催化剂,可以满足半再生催化重整装置长周期稳定运转的需要。SR-1000催化剂开工方法简单、安全、环保。 Semi-regeneration catalytic reforming catalyst SR-1000 developed by SINOPEC Research Institute of Petroleum Processing was applied in a 450 kt a reforming unit of Refinery and Chemical Industry Corporation of Yumen Oilfield Company of PetroChina.The operation results of nearly 400 days showed that the octane number RON of C 5+stabilized gasoline is 94.0 and the yield was 89.2%at a WABT of 468℃,which indicates that SR-1000 catalyst has better activity and selectivity.Under the condition that the raw material properties and reaction severity were basically the same,the performance of SR-1000 catalyst was better than that of PRT-C PRT-D reforming catalyst and can meet the needs of long-term stable operation of semi-regeneration catalytic reforming unit.The start-up method of SR-1000 catalyst is simple,safe and environmentally friendly.
作者 杨朝华 段超著 刘勇 张玉红 王嘉欣 Yang Zhaohua;Duan Chaozhu;Liu Yong;Zhang Yuhong;Wang Jiaxin(Refinery and Chemical Industry Corporation,PetroChina Yumen Oilfield Company,Jiuquan,Gansu 735000;Planning and Design Institute,PetroChina Yumen Oilfield Company;SINOPEC Research Institute of Petroleum Processing)
出处 《石油炼制与化工》 CAS CSCD 北大核心 2020年第10期77-80,共4页 Petroleum Processing and Petrochemicals
关键词 半再生催化重整 催化剂 石脑油 汽油 辛烷值 semi-regeneration catalytic reforming catalyst naphtha gasoline octane number
  • 相关文献

参考文献5

二级参考文献38

  • 1张兰新,唐激扬,孟宪评,袁赞根.CB-6/CB-7催化剂两段重整工艺的研究[J].石油炼制,1993,24(1):1-9. 被引量:3
  • 2王君钰.高铼/铂比重整催化剂与传统铂铼催化剂性能对比[J].石油炼制,1989,20(12):45-50. 被引量:3
  • 3孙作霖,张大庆.新型条状重整催化剂的性能[J].石油炼制与化工,1996,27(8):1-6. 被引量:3
  • 4赵佩琳 王君钰.铂铼重整催化剂上铼、硫组元作用的考察[J].石油学报:石油加工,1986,2(3):47-57.
  • 5Richard Nielsen. Advances in catalytic reforming. PEP Report 129B,Menlo Park,California, 2006,4-20.
  • 6Meyers R A. Handbook of petroleum refining processes(See ond edition). New York: McGraw Hill, 1997,43 -48.
  • 7George J. Catalytic naphtha reforming science and technology. New York:Marcel Dekker lnc,1995,481-191.
  • 8Acricos A, Babcock B D, Pigford R L. Flow distribution in manifolds. Chem Eng Sci, 1959, (10) : 112-124.
  • 9Lin F N. Improved catalytic reforming process. PCT, WO Pat AppI,WO 02/06426. 2002.
  • 10OGJ. International refining-catalyst compilation-1997. Oil & Gas Journal, 1997,95(40) :43-44.

共引文献27

同被引文献18

引证文献5

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部