期刊文献+

Ti-B20合金组织性能与时效温度的关系

Relationship between microstructure and properties of Ti-B20 alloy and its aging temperature
下载PDF
导出
摘要 采用OM、X射线衍射仪、SEM等研究了固溶时效对高强亚稳态Ti-B20合金组织性能的影响。结果显示:合金经固溶时效后,由α相和β相组成;随时效温度的升高,析出相由针状变成片层,尺寸增大且由晶界处优先析出,合金抗拉强度随温度的升高而下降。 The effect of solution aging on the microstructure and properties of high-strength metastable Ti-B20 alloy was studied by OM,XRD and SEM.The results showed that the alloy was composed ofαphase andβphase after solution aging;with the increase of the aging temperature,the precipitated phase changed from acicular to lamellar,the size increased and precipitated preferentially from the grain boundary;the tensile strength of the alloy decreased with the increase of the temperature.
作者 刘杰 彭国羽 冀宣名 周磊 LIU Jie;PENG Guoyu;JI Xuanming;ZHOU Lei
出处 《现代机械》 2020年第4期91-94,共4页 Modern Machinery
基金 贵州大学SRT项目(贵大SRT字〔2018〕294号) 贵州省科技厅科技平台及人才项目(黔科合平台人才〔2017〕5656)。
关键词 Ti-B20合金 热处理 显微组织 力学性能 Ti-B20 alloy heat treatment microstructure mechanical property
  • 相关文献

参考文献8

二级参考文献55

共引文献110

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部