摘要
A plasma cladding experiment was carried out to investigate the characteristics(surface hardness,microstructure,friction,wear properties from different substrates to the cladding layer and the bond strength)of plasma cladding Fe-Cr-Nb-Si-Mo alloy cladding layers on different substrates.In order to improve the abrasion resistance of the scraper middle trough,the plasma cladding technique was used to clad the alloy ceramic powder Ig7 on the surface of the middle trough NM450,WH60A,Hardox450,and Weartuf450 to create Fe/Cr/Nb/Mo/V cladding layer.Based on the experiment results,the microstructure,friction and wear properties of the four cladding layers were analyzed,and the bond strength between the cladding layer and the substrate was also tested.The experimental results show that the main phases of the four cladding layers are martensite and all kinds of metal carbides((Nb,Mo)C,VC,and Cr7C3).WH60A surface cladding layer has shown good friction and wear properties.
作者
高贵军
LI Kang
CHEN Weiwang
ZHANG Hongbin
YANG Xiaobing
ZHANG Hongyu
李军霞
GAO Guijun;LI Kang;CHEN Weiwang;ZHANG Hongbin;YANG Xiaobing;ZHANG Hongyu;LI Junxia(College of Mechanical and Vehicle Engineering,Taiyuan University of Technology,Taiyuan 030024,China;Shandong Province KeyLaboratory of Mine Mechanical Engineering,Shandong University of Science and Technology,Qingdao 266590,China;JMC Heavy Duty Vehicle Co.,Ltd.,Taiyuan 030024,China)
基金
Funded by the NSFC-Shanxi Coal Based Low Carbon Joint Fund Focused on Supporting Project(No.U1510205)
the Shandong Province Key Laboratory of Mine Mechanical Engineering(No.2019KLMM210)
the Key Research and Development(R&D)Projects of Shanxi Province(No.201903D121065)。