期刊文献+

立式五轴数控机床机电优化方法研究 被引量:2

Research on Mechanical and Electrical Optimization Method for Vertical Five-axis CNC Machine
下载PDF
导出
摘要 根据VMC立式五轴数控机床结构及其特点,从机械和电气方面对其进行优化。综合考虑工艺装备、装配工艺、电气控制、PLC逻辑及先进的五轴精度检测方法,提出一套适用于立式五轴数控机床的机电优化方法。通过对比优化前后的性能,证明了其有效性。该研究对国产高端数控机床产品升级具有理论和现实意义。 The VMC vertical five-axis CNC machine tool was optimized from mechanical and electrical aspects according to its structure and characteristics.Process equipment, assembly process, electrical control, PLC logic and advanced five-axis precision detection method were considered, and an electromechanical optimization method suitable for vertical five-axis CNC machine was proposed.The effectiveness of the method was proved by comparing the performance before and after optimization.The research has theoretical and practical significance for the upgrade of domestic high-end CNC machine.
作者 郭志研 夏加宽 时光 GUO Zhiyan;XIA Jiakuan;SHI Guang(School of Electrical Engineering,Shenyang University of Technology,Shenyang Liaoning 110870,China;Shenyang FIDA NC&MACHINE Co.,Ltd.,Shenyang Liaoning 110142,China)
出处 《机床与液压》 北大核心 2020年第19期132-136,共5页 Machine Tool & Hydraulics
关键词 五轴数控机床 工艺装备 机电优化 Five-axis CNC machine Process equipment Electromechanical optimization
  • 相关文献

参考文献3

二级参考文献25

  • 1蒋向前.现代产品几何量技术规范(GPS)国际标准体系[J].机械工程学报,2004,40(12):133-138. 被引量:34
  • 2田兆青,来新民,林忠钦.多工位薄板装配偏差流传递的状态空间模型[J].机械工程学报,2007,43(2):202-209. 被引量:39
  • 3周鸿斌,张建民,付红伟,李少玲.PRS-XY型混联数控机床工作台误差补偿技术[J].北京理工大学学报,2007,27(2):120-124. 被引量:5
  • 4康方,范晋伟.用于精度分配的数控机床误差建模[J].机械制造,2007,45(4):9-12. 被引量:8
  • 5栗时平.[D].国防科学技术大学,2002(10).
  • 6ANSELMETTI B, CHAVANNE R, YANG Jianxin, et al. Quick GPS.- A new CAT system for single-part tolerancing[J]. Computer-Aided Design, 2010, 42(9): 768-780.
  • 7AMETA G; SERGE S, GIORDANO M. Comparison of spatial math models for tolerance analysis : Tolerance-maps, deviation domain, and TTRS[J]. Journal of Comparing and Information Science in Engineering, 2011, 11(2): 021004. 1-021004.8.
  • 8HEN Zhengshu, GAURAV A, JAMI J S, et al. A comparative study of tolerance analysis methods[J]. Journal of Computing and Information Science in Engineering, 2005, 5(3): 247-256.
  • 9MANTRIPRAGADA R, WHITNEY D E. Modeling and controlling variation propagation in mechanical assemblies using state transition models [J]. IEEE Transactions on Robotics and Automation, 1999, 15(1): 124-140.
  • 10LIU Jian, JIN Jionghua, SHI Jianjun. State space modeling for 3D variation propagation in rigid-body multistage assembly processes[J]. IEEE Transactions on Automation Science and Engineering, 2010, 7(2): 274-290.

共引文献33

同被引文献22

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部