摘要
在数控车床编程中,内外圆粗车复合循环指令G71是应用最为广泛的复合循环指令之一,但G71 Ⅰ型指令只能应用于单调变化的内外圆加工,应用范围受限。在GSK980TB3系统下,G71 Ⅱ型指令可在凹凸变化的零件编程中实现巧妙应用,更好地补充Ⅰ型应用的不足,进一步简化了编程强度,提高了编程效率。
In CNC lathe programming,the compound cycle command G71 for rough turning inside and outside circle is one of the most widely used compound cycle commands,but the G71Ⅰtype command can only be used for monotonous change of inside and outside circle machining,and its application range is limited.Under the GSK980 TB3 system,the G71Ⅱtype instruction can be used ingeniously in the programming of uneven parts,which can better supplement the deficiencies of theⅠtype application,further simplify the programming intensity and improve the programming efficiency.
作者
加有维
栗茂林
李党超
张铭
JIA You-wei;LI Mao-lin;LI Dang-chao;ZHANG Ming(School of Engineering Workshop,Xi'an Jiaotong University,Xi'an 710049,China)
出处
《机械工程与自动化》
2020年第5期176-177,179,共3页
Mechanical Engineering & Automation
基金
教育部产学合作协同育人项目2019年第一批(201901198014)
西安交通大学2019年本科实践教学改革研究专项项目(19SJZX36)
西安交通大学2018年教学改革研究重点项目(1802Z)。