期刊文献+

Hi-B钢二次再结晶退火过程中未异常长大Goss晶粒晶界特征 被引量:2

Grain boundary characteristics of non-abnormal grown Goss grains of Hi-B steel during secondary recrystallization annealing
原文传递
导出
摘要 采用中断法并结合电子背散射衍射(EBSD)技术,研究了Hi-B钢二次再结晶退火过程中大量未异常长大Goss取向晶粒的晶界特征。结果表明:未异常长大Goss取向晶粒的晶粒尺寸相较于基体晶粒和相邻晶粒并没有明显的差异性。同时未异常长大Goss取向晶粒与异常长大Goss取向晶粒周围的HE晶界和CSL晶界比例也没有明显的差异。在二次再结晶退火过程中,尺寸优势、HE晶界、CSL晶界和Goss取向偏离度都不能保证Goss取向晶粒发生异常长大。而随着退火温度的升高,Goss取向晶粒有逐渐向标准Goss晶粒取向靠拢的趋势。 Grain boundary characteristics of non-abnormal grown Goss grains of Hi-B steel during secondary recrystallization annealing was studied by using interruption method combined with EBSD technique.The results show that the grain size of non-abnormal grown Goss oriented grains is not significantly different from that of matrix grains and adjacent grains.At the same time,the proportion of HE and CSL grain boundaries around the non-abnormal grown Goss grains has no significant difference with those of abnormal grown Goss grains.During the secondary recrystallization annealing,the size superiority,HE and CSL grain boundary,and Goss orientation deviation can’t guarantee the abnormal growth of Goss oriented grains.With annealing temperature increasing,the Goss oriented grains tend to be closer to the standard Goss grains.
作者 徐帅 鲍思前 柯珊珊 雷小玲 卢维娜 Xu Shuai;Bao Siqian;Ke Shanshan;Lei Xiaoling;Lu Weina(Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education,Wuhan University of Science and Technology,Wuhan Hubei 430081,China)
出处 《金属热处理》 CAS CSCD 北大核心 2020年第9期167-171,共5页 Heat Treatment of Metals
基金 国家自然科学基金(51274155)。
关键词 Hi-B钢 二次再结晶 Goss取向晶粒 异常长大 Hi-B steel secondary recrystallization Goss oriented grains abnormal growth
  • 相关文献

参考文献2

二级参考文献19

  • 1Hayakawa Y, Szpunar J A. The role of grain boundary character distribution in secondary recrystallization of electrical steels. Acta Mater, 1997, 45(3) :1285.
  • 2Rajmohan N, Szpunar J A, Hayakawa Y. A role of fractions of mobile grain boundaries in secondary recrystallization of Fe-Si steels. Acta Mater, 1999, 47(10) : 2999.
  • 3Hayakawa Y, Szpunar J A. A new model of Goss texture development during secondary recrystallization of electrical steel. Acta Mater, 1997, 45(11): 4713.
  • 4Komatsubara M, Hayakawa Y, Takamiya T, et al. Newly developed grain-oriented Si-steel with thinner gauges. J Phys IV, 1995, 8(2) :467.
  • 5lnokuti Y, Maeda C, Itoh Y. Computer color mapping of configuration of Goss grains after an intermediate annealing in grain oriented silicon steel. Trans Iron Steel lnst Jpn, 1987, 27(2) :139.
  • 6Lin P, Palumbo G, Harase J, et al. Coincidence site lattice (CSL) grain boundaries and Goss texture development in Fe-3% Si alloy. Acta Mater, 1996, 44(12) : 4677.
  • 7Morawiec A. Grain misorientations in theories of abnormal grain growth in silicon steel. Scripta Mater, 2000, 43 (3) :275.
  • 8Matsuo M. Texture control in the production of grain oriented silicon steels. ISIJ lnt, 1989, 29 (10) : 809.
  • 9Park J Y, Han K S, Woo J S, et al. Influence of primary annealing condition on texture development in grain oriented electrical steels. Acta Mater, 2002, 50 (7) : 1825.
  • 10Hwang N M. Simulation of the effect of anisotropic grain boundary mobility and energy on abnormal grain growth. J Mater Sci, 1998, 33(23) :5625.

共引文献19

同被引文献27

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部