New embedded DDSCR structure with high holding voltage and high robustness for 12-V applications

A new dual directional silicon-controlled rectifier based electrostatic discharge (ESD) protection device suitable for 12-V applications is proposed in this paper. The proposed device (NPEMDDSCR) is based on the embedded DDSCR (EMDDSCR) structure, in which the P+ electrode and P+ injection are removed from the inner finger. Compared with the conventional modified DDSCR (MDDSCR), its high holding voltage meets the requirements for applications. Compared with the embedded DDSCR (EMDDSCR), it has good conduction uniformity. The MDDSCR, EMDDSCR, and NPEMDDSCR are fabricated with an identical width in a 0.5-μm CDMOS process. In order to verify and predict the characteristics of the proposed ESD protection device, a transmission line pulse (TLP) testing system and a two-dimensional device simulation platform are used in this work. The measurements demonstrate that the NPEMDDSCR provides improved reliability and higher area efficiency for 12 V or similar applications. The measurement results also show that the NPEMDDSCR provides higher robustness and better latch-up immunity capability.