摘要
本文主要研究了以马来酸酐接枝聚丙烯(PP-g-MAH)作为增溶剂的聚丙烯(PP)/纳米蒙脱土(n-MMT)共混单丝的制备,及其PP-g-MAH的用量对共混体系结构和性能的影响。结果表明,n-MMT添加量为3%时,PP-g-MAH含量为5%时,共混单丝中n-MMT分散均匀、拉伸强度也最佳,所以选取最优添加量为5%。
In this paper, the preparation of polypropylene(PP)/nano montmorillonite(n-MMT)/monofilament with maleic anhydride grafted polypropylene(PP-g-MAH) as compatibilizer and the effect of the amount of PP-g-MAH on the structure and properties of the blend system were studied. The results showed that when the ammount of n-MMT was 3 % and the content of PP-g-MAH was 5 %, the dispersity of n-MMT in the matrix was uniform and the tensile strength of the fiber was the best. Therefore, the optimal amount of n-mmt was 5 %.
作者
司淼
戴礼兴
孙君
徐燕
Si Miao;Dai Lixing;Sun Jun;Xu Yan(Suzhou University Faculty of Materials and Chemistry,Suzhou 215123;Nantong NTEC Monofilament Technology Co.,Ltd.,Nantong 226000,China)
出处
《广东化工》
CAS
2020年第17期24-26,共3页
Guangdong Chemical Industry
关键词
聚丙烯
纳米蒙脱土
单丝
polypropylene
nano montmorillonite
monofilament