Aerodynamic performance enhancement forflapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance.In this paper,a novel active flow control technology called Co-Flow Jet(CFJ)is applied to flapping airfoils.The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes(URANS)simulation with Spalart-Allmaras(SA)turbulence model.Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case.Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion,with Reynolds number 70,000 and reduced frequency 0.2.As a result,CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when Cμgreater than 0.04,which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer.Besides,typical kinematic and geometric parameters,including the reduced frequency and the positions of the suction and injection slot,are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil.And a variable Cμjet control strategy is proposed to further improve effective propulsive efficiency.Compared with using constant Cμ,an increase of effective propulsive efficiency by22.6%has been achieved by using prescribed variable CμNACA6415-based CFJ airfoil at frequency 0.2.This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles(FMAV).