摘要
工程监管信息有效传递是实现工程有效监管的前提条件之一。为此,针对目前工程监管信息传递效率低下等问题开展基于BIM的工程监管信息传递效率研究。在分析基于BIM的工程监管内涵和层次的基础上,从质量和时效两方面建立信息传递衡量模型,并通过对"点对点"传统监管模式和基于BIM的协调监管模式两种不同方式的信息传递效率进行计算后,得出BIM技术应用能提高建设工程领域监管信息传递效率的结论。
Effective transmission of engineering supervision information is one of the preconditions for effective supervision of engineering.Therefore,aiming at the low efficiency of information transmission of engineering supervision,the BIM based project supervision information transmission efficiency research is carried out.Based on the analysis of the connotation and level of BIM in engineering supervision,a model to measure information transmission from the aspects of quality and timeliness is established.After calculating the information transmission efficiency of"point-to-point"traditional supervision and BIM based coordinated supervision mode,it concludes that the application of BIM technology can improve the information transmission efficiency of supervision in the field of construction engineering.
作者
郭军
陈铭
王祎晨
丰景春
张可
GUO Jun;CHEN Ming;WANG Yi-chen;FENG Jing-chun;ZHANG Ke(Nanjing Urban Construction Management Group Co Ltd,Nanjing 210006,China;Business School,Hohai University,Nanjing 211100,China;Institute of Project Management,Hohai University,Nanjing 211100,China;Jiangsu Provincial Collaborative Innovation Center of World Water Valley and Water Ecological Civilization,Nanjing 211100,China)
出处
《土木工程与管理学报》
北大核心
2020年第5期95-99,共5页
Journal of Civil Engineering and Management
基金
住房和城乡建设部2018年科学技术项目计划(2018-K8-023)
广东省水利科技计划创新项目(2017-04)
国家社会科学基金(17BGL156)
中央高校基本科研业务费专项资金(2018B53014,2017B35214)。
关键词
BIM
工程监管
信息
传递效率
BIM
engineering supervision
information
transmission efficiency