期刊文献+

热压式沥青混凝土桥面铺装设计与性能评价 被引量:9

Design and Performance Evaluation of Hot Rolled Asphalt Bridge Deck Pavement
下载PDF
导出
摘要 研究表明热压式沥青混凝土是一种变形能力强、疲劳耐久性和高温性能良好的铺装材料,对桥面铺装具有很好的适应性。目前热压式沥青混凝土在桥面铺装工程中应用不多,国内还未形成热压式沥青混凝土统一的设计方法和技术规范。在国内外热压式沥青混凝土研究的基础上,针对我国桥面铺装的工况特点,对热压式沥青混凝土原材料、级配、油石比等进行研究,确定最佳的热压式沥青混凝土路用性能。 The research shows that the hot-press asphalt concrete is a paving material with strong deformation ability,fatigue durability and high temperature performance,and has good adaptability to bridge deck pavement.At present,hot-press asphalt concrete is not widely used in bridge deck pavement engineering,and the unified design method and technical specifications of hot-press asphalt concrete have not yet been formed in China.Based on the research of hot-press asphalt concrete at home and abroad,this paper studies the hot-press asphalt concrete raw materials,grading and oil-stone ratio to determine the best hot-press asphalt for the characteristics of bridge deck pavement in China.Concrete road performance.
作者 张艳君 赵文忠 王鹏 张超 贾晓鹏 王向平 赵立东 ZHANG Yanjun;ZHAO Wenzhong;WANG Peng;ZHANG Chao;JIA Xiaopeng;WANG Xiangping;ZHAO Lidong(Highway Research Institute of the Ministry of Transport,Beijing 100088,China;Hebei Qugang Expressway Development Co.,Ltd,Dingzhou,Hebei 073000,China;Zhonglu Gaoke(Beijing)Highway Technology Co.,Ltd.,Beijing 100088,China)
出处 《公路工程》 北大核心 2020年第5期108-111,141,共5页 Highway Engineering
基金 河北省交通运输厅厅科技项目(QG2018-6)。
关键词 桥面铺装 热压式沥青混凝土 原材料设计 配合比设计 路用性能 deck paving hot rolled asphalt raw material design mix ratio design road performance
  • 相关文献

参考文献1

二级参考文献6

  • 1Hot roiled asphalt and precoated chippings [EB/OL]. http : //www. highwaysmai- ntenance.com/hrachips. htm, 2003.
  • 2British Standards Institution. Hot rolled asphalt for roads and other paved areas: Part1[Z]. Specification for constituent materials and asphalt mixtures. BS 594: Part 1: 1992. BSI, London.
  • 3Claxton M J. Hot Rolled Asphalt -The Prediction of Rut Resistance[Z]. Technieal Report No. 1995-224 388, dated 18.10.95. BP, Sunbury.
  • 4British Standards Institution. Sampling and examination of bituminous mixtures for roads and other paved areas: Part 110[Z]. Methods of test for the determination of wheel tracking rate. BS 598: Part 110: 1996. BSI, London
  • 5Highways Agency. Hot rolled asphalt wearing course (performance related design mix) [Z]. Highways Agency Specification for Highway Works, Clause 943. HMSO, London.
  • 6沥青路面掺配、嵌入式抗滑表层修筑技术研究(西部交通建设科技项目可行性研究报告)[R].

共引文献9

同被引文献23

引证文献9

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部