摘要
通过优化和控制冶炼、锻造、热处理等热加工工艺,成功制造厚壁直角弯管锻件。锻件水、冒口侧取样位置及内、外拐角解剖取样位置的性能检验结果均满足技术条件要求,性能均匀且具有较大富余量。
Thick-wall right-angle elbow forgings have been produced successfully by optimizing and controlling some thermal processes,such as steel melting,forging and heat treatment.The test results of samples cut from the positions in the nozzle and riser areas and the inner and outer corners on the forgings all meets the technical requirement in terms of mechanical properties.The mechanical property of the forgings distributes evenly and higher than the required.
出处
《一重技术》
2020年第4期43-47,共5页
CFHI Technology
关键词
16MND5钢
直角弯管
厚壁锻件
亚温淬火
16MND5steel
right-angleelbow
thick-wallforging
intercriticalquenching