摘要
根据GB/T 476-2008《煤中碳和氢的测定方法》[1],按照JJF1059.1-2012《测量不确定度评定与表示》[2],对三节炉法测定煤中碳和氢含量测定结果不确定度的来源进行了分析,并对各标准不确定度分量进行识别和计算,得出合成标准不确定度,最终确定扩展不确定度和不确定度报告。评定结果表明:取包含因子k=2时,空气干燥基碳和干燥基碳的扩展不确定度为:0.05%,空气干燥基氢和干燥基氢的扩展不确定度为:0.06%。
Based on GB/T 476-2008 Determination of Carbon and Hydrogen in Coal[1]and JJF1059.1-2012 Evaluation and Representation of Measurement Uncertainty[2],the uncertainty components in the determination process of carbon and hydrogen content in coal by three section furnace method were identified and calculated.Then the combined standard uncertainty was achieved.At last,the expand uncertainty and uncertainty report was determined.The evaluation results showed that the expanded uncertainty of air dried carbon and dry carbon was 0.05%,and that of air dried hydrogen and dry hydrogen was 0.06%.
作者
张航妥
顾秋香
胡媛媛
李娟
ZHANG Hang-tuo;GU Qiu-xiang;HU Yuan-yuan;LI Juan(Shaanxi Coalfield Geology Laboratory Testing Co.,Ltd.,Shaanxi Xi'an 710054;Key Laboratory of Coal Resources Exploration and Comprehensive Utilization,Ministry of Natural Resources,Shaanxi Xi'an 710054;Resources and Environmental Engineering of Yibin University,Sichuan Yinbin 644000,China)
出处
《广州化工》
CAS
2020年第21期106-108,共3页
GuangZhou Chemical Industry
关键词
三节炉法
煤中碳和氢含量测定
不确定度分量
合成标准不确定度
扩展不确定度
three section furnace method
carbon and hydrogen content in coal
uncertainty component
combined standard uncertainty
expand uncertainty