期刊文献+

基于熵理论的集装箱码头装卸设备故障状态不确定性研究 被引量:1

Research on uncertainty of fault state of container terminal handling equipment based on entropy theory
下载PDF
导出
摘要 结合集装箱码头装卸设备系统运行机理,基于系统科学中的熵理论,从状态不确定性的角度对设备故障状态进行研究,分析设备故障状态不确定性的计算方法,提出以设备故障状态对设备组成系统造成的结果价值为目标的集装箱码头装卸设备故障状态评价模型,计算了以结果价值为参数的集装箱码头装卸设备故障状态的熵,并应用于实际算例。验证了熵理论在研究集装箱码头装卸设备故障状态的可行性,以及结果价值参数在判断设备故障状态中的作用。 Combined with the operation mechanism of container terminal handling equipment system,based on entropy theory in system science,this paper studied the equipment fault state from the point of view of state uncertainty,analyzed the calculation method of equipment fault state uncertainty,put forward an evaluation model of container terminal handling equipment fault state aiming at the resultant value of equipment composition system,calculated the entropy of container terminal handling equipment fault state with resultant value as a parameter,and applied it to an actual example.This paper verifies the feasibility of entropy theory in studying the fault state of loading and unloading equipment in container terminals,and the role of the result value parameter in judging fault states of equipment.
作者 潘子涵 周强 Pan Zihan;Zhou Qiang
出处 《起重运输机械》 2020年第19期68-75,共8页 Hoisting and Conveying Machinery
关键词 装卸设备 故障状态 不确定性 集装箱码头 loading and unloading equipment fault state entropy uncertainty container terminal
  • 相关文献

参考文献4

二级参考文献46

  • 1姜丹.加权熵公理构成证明的新方法[J].中国科学技术大学学报,1993,23(2):159-168. 被引量:3
  • 2金玉兰,蒋祖华,侯文瑞.以可靠性为中心的多部件设备预防性维修策略的优化[J].上海交通大学学报,2006,40(12):2051-2056. 被引量:40
  • 3蔡景,左洪福,王华伟.多部件系统的预防性维修优化模型研究[J].系统工程理论与实践,2007,27(2):133-138. 被引量:38
  • 4姜丹,信息理论与编码,1992年
  • 5黄孟藩,管理决策概论,1982年
  • 6Ateekh R,Subash A. Reconfigurations of manufac-turing systems—An empirical study on concepts,research, and applications [J]. The InternationalJournal of Advanced Manufacturing Technology,2013,66(4) : 107-124.
  • 7Wang H,Wang H,Hu S j. Utilizing variant differ-entiation to mitigate manufacturing complexity inmixed-model assembly systems Q]. Journal of Manu-facturing Systems, 2013, 32(4) .731-740.
  • 8Smart J,Calinescu A,Huatuco H L. Extending theinformation-theoretic measures of the dynamic com-plexity of manufacturing systems [J]. International Journal of Production Research, 2013,51 (2): 362-379.
  • 9ElMaraghy H, AlGeddawy T. Co-evolution of prod-ucts and manufacturing capabilities and application inauto-parts assembly [J]. Flexible Services and Manu-facturing Journal, 2012, 24(2) : 142-170.
  • 10Fujimoto H,Ahmed A, Entropic evaluation of as-semblability in concurrent approach to assembly plan-ning [C] // Proceedings of the IEEE InternationalSymposium on Assembly and Task Planning. Fukuoka:IEEE, 2007: 306-311.

共引文献67

同被引文献1

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部