摘要
在商用K435合金基础上再添加0.8%Ti制备了试验用镍基合金,并与K435合金进行了显微组织、高温耐磨损性能和抗高温氧化性能的对比与分析。结果表明:与K435合金的组织性能相比,试验的铸造镍基合金的晶粒细化,800℃×20 min磨损试验后的磨损体积减小41.03%,800℃×25 min高温氧化后的单位面积质量增加减小34.4%,合金具有更好的高温耐磨损性能和抗高温氧化性能。
An experimental nickel based alloy was prepared by further adding 0.8% Ti to the commercial K435 alloy, and the microstructure, wear resistance and oxidation resistance were compared with K435 alloy. The results show that compared with the microstructure and properties of K435 alloy,the tested cast nickel based alloy has finer grain, the wear volume is reduced by 41.03% after wear test of 800℃×20 min, the mass gain per unit area is decreased by 34.4% after high temperature oxidation of 800℃ ×25 min, and the alloy has better high temperature wear resistance and high temperature oxidation resistance.
作者
于国英
李辉
张勇
张林
YU Guoying;LI Hui;ZHANG Yong;ZHANG Lin(Hebei Institute of Mechanical and Electrical Technology,Xingtai 054000,China;National Technological Innovation Method and Tool Engineering Research Center,Hebei University of Technology,Tianjin 300401,China)
出处
《热加工工艺》
北大核心
2020年第19期70-72,共3页
Hot Working Technology
基金
河北省科学技术厅项目(20132205)。
关键词
铸造镍基合金
显微组织
高温耐磨损性能
抗高温氧化性能
cast nickel based alloy
microstructure
high temperature wear resistance
high temperature oxidation resistance