摘要
为了提升氧化锌压敏电阻的4/10μs大电流冲击能力,从侧面绝缘入手研制出与电阻片本体相匹配的无机高阻层,采用成分为Sb2O3、Bi2O3、Ni2O3、MnO2的侧面无机高阻层,D31电阻片测试参数性能稳定、老化性能好、压比低,重复电荷转移前后工频变化<5%,满足新国标的要求。
In order to improve the 4/10 μs high-current impulse capability of zinc oxide varistors,an inorganic high-resistance layer matched with the body of the varistors is developed from the side insulation. The inorganic high-resistance layer is composed of Sb2O3、Bi2O3、Ni2O3、MnO2. The D31 varistors coated with inorganic high resistance layer can withstand 4/10 μs 65 k A high current impulse 2 times and have stable test parameters,good aging performance and low pressure ratio. The power frequency change before and after repeated charge transfer is less than 5%,which meets the requirements of the new national standard.
作者
田冰
厍海波
朱成洋
李文江
张志源
TIAN Bing;SHE Haibo;ZHU Chengyang;LI Wenjiang;ZHANG Zhiyuan(Jinguan Electric Co.,Ltd.,Nanyang 473000,China)
出处
《电瓷避雷器》
CAS
北大核心
2020年第5期119-123,共5页
Insulators and Surge Arresters
关键词
大电流冲击
侧面绝缘
无机高阻层
重复电荷转移
high current impulse
side insulation
inorganic high resistance layer
repeated charge transfer