简易数控磨床编程及CAM后处理定制研究

Research on Simple NC Grinder Programming and CAM Post-processing Customization

针对制造业中微小轴类零件需要外圆磨床加工而开发的简易型数控磨床,由于没有现成的CAM后处理程序与之相适应,所以应用并不广泛,本文通过对该机床的磨削程序研究出发,在Siemens NX10软件的后处理(Postbuild)中构建可以直接应用在该类机床上的后处理器,输出的程序可以直接使用在该机床的加工中。

Aiming at small axial parts need in manufacturing cylindrical grinder processing and development of the simple nc grinding machine,because there is no ready-made corresponding CAM post-processing program,so is not widely used,this article through to the study of machine tool grinding process,in the post-processing(Postbuild)of Siemens NX10 software build after can be directly applied in the machine tool's processor,output of the program can be used directly in the machining process of the machine tool.