期刊文献+

不同玻璃盖板对吹胀式PV/T组件的性能影响 被引量:4

The influence of different glass covers on the performance of roll-bond PV/T module
下载PDF
导出
摘要 玻璃盖板可以有效提高光伏/光热一体化(PV/T)组件的热性能。文章分别采用超白压延玻璃和超白浮法玻璃作为盖板,设计了两种基于吹胀式集热器的多晶硅PV/T组件,并对由两种组件构成的PV/T系统进行了户外对比实验研究。结果表明:使用超白压延玻璃盖板PV/T系统的电效率为13.83%,热效率为48.56%;使用超白浮法玻璃盖板PV/T系统的电效率和热效率均略低于前者,分别为13.15%和47.99%。由此可见,采用超白压延玻璃作为PV/T组件的盖板可以增强PV/T系统的性能。 The glass cover can effectively improve the thermal performance of photovoltaic/thermal(PV/T)modules.In this paper,two kinds of polysilicon PV/T modules based on roll-bond thermal collectors were designed by using ultra-clear rolling and ultra-clear float glasses as covers,while the two PV/T systems were comparatively studied under the outdoor condition.Experimental results showed that the electrical and the thermal efficiencies of PVT systems were 13.83%,13.15%and 48.56%,47.99%,with the ultra-clear rolling glass and ultra-clear float glass covers,respectively.Therefore,the performance of the PV/T system can be enhanced by using ultra clear rolling glass as the cover glass of the PV/T module.
作者 张乾 庞玮 于洪文 严辉 宋兴斌 宋兴贞 Zhang Qian;Pang Wei;Yu Hongwen;Yan Hui;Song Xingbin;Song Xingzhen(College of Materials Science and Engineering,Beijing University of Technology,Beijing 100124,China;Shandong Sangle Solar Energy Co.,Ltd.,Jinan 250100,China)
出处 《可再生能源》 CAS 北大核心 2020年第12期1604-1609,共6页 Renewable Energy Resources
基金 国家自然科学基金(61574009)。
关键词 PV/T组件 玻璃盖板 性能评估 PV/T module glass cover performance
  • 相关文献

参考文献4

二级参考文献23

  • 1HUANG B J,LIN T H,HUNG W C,et al. Performanceevaluation of solar photovoltaic/ thermal systems[J].Solar Energy, 2001,70(5) :443-448.
  • 2徐旭,陈彤,严建华,池涌,岑可法.TiO_2光催化降解垃圾焚烧炉飞灰中二噁英的实验研究[J].环境保护科学,2007,33(5):1-3. 被引量:10
  • 3申政.单、非晶硅复合光伏组件的优化匹配研究[D]天津城市建设学院,天津城市建设学院2008.
  • 4P.J.Sanchez-Illescas,,P.Carpena,P.Bernaola-Galva,et al.An analysis of geometrical shapes for PV module glass encapsulation. Sol.Energy Mater.Sol.Cells . 2008
  • 5H.Nagel,A.Metz,R.Hetzel.Porous SiO2films prepared by remote plasma-enhanced chemical vapor deposition-a novel antireflection coating technology for photovoltaic modules. Sol.Energy Mater.Sol.Cells . 2000
  • 6C.Ballif,J.Dicker,D.Borchert,et al.Solar glass with industrial porous SiO2antireflection coating:measurements of photovoltaic module properties improvement and modeling of yearly energy yield gain. Sol.Energy Mater.Sol.Cells . 2004
  • 7N.G.Dhere,N.R.Raravikar.Adhesional shear strength and surface analysis of a PV module deployed in harsh coastal climate. Sol.Energy Mater.Sol.Cells . 2001
  • 8G.J.Jorgensen,K.M.Terwilliger,J.A.DelCueto,et al.Moisture transport,adhesion,and corrosion protection of PV module packaging materials. Sol.Energy Mater.Sol.Cells . 2006
  • 9M.D.Kempe,G.J.Jorgensen,K.M.Terwilliger,et al.Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices. Sol.Energy Mater.Sol.Cells . 2007
  • 10Antonio Parretta Angelo Sarno Pierpasquale Tortora Haruna Yakubu Pasqualino Maddalena Jianhua Zhao and Aihua Wang.Angle-dependent reflectance measurements on photovoltaic materials and solar cells. Optics Communication . 1999

共引文献19

同被引文献37

引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部