常规试验靶场多站协同测试三段式接力引控方法

Three Stage Relay Guidance and Control Method for Multi Station Cooperative Test in Routine Weapon Range

雷达、光电设备和遥测设备是常规试验靶场的主要测试设备,在实际试验中,常常同时布设这三类设备对同一弹道进行跟踪测试。然而传统外弹道测试方法是三类测试系统各自独立,自成体系,无法形成测试系统间信息融合和互相引导。本文针对多站协同测试设计了一种三段式接力测试引控方法,设计了实时引控逻辑,在预设引导源均无效的情况下采用自动优选引导源的方法进行引导控制。试验结果表明,与传统测试相比,利用设计的多站协同测试设备跟踪率得到显著提升,尤其光电设备跟踪率从75%提高到96%左右。

Radar,electro-optical equipment and telemetry equipment are the main test equipments in the conventional test range. In practical tests,these three kinds of equipments are often established to track and test the same flying target.However,the traditional method of measurement of exterior trajectory is that the test equipment is independent of each other,so it cannot achieve information fusion and mutual guidance. In the paper,a three stage relay guidance and control method is designed for multi station cooperative test,and real time guidance and control logic is also designed. When all default guide sources are invalid,guidance and control are carried out using the method of automatically optimizing guide source. The experimental results show that the tracking rate of the networked measurement is significantly improved compared with the traditional measurement,especially the tracking rate of photoelectric device is increased from 75% to about 96%.