摘要
对比了高能电子不同能量(keV)对微生物D10测试结果的影响,测定了萎缩芽胞杆菌和短小芽胞杆菌的D10值。通过小试工作,筛选确定了采用高能电子外照射法对于PET空瓶进行杀菌时的能量(keV)和剂量(kGy),并进行了微生物挑战测试。在所建立工业化装置上,测定了目标瓶在高能电子处理后,目标瓶内壁各部分的剂量和杀灭对数值,结果表明,在选定的杀菌工艺条件下,使用高能电子对PET瓶进行杀菌,对指示菌芽胞可以达到6 log杀灭对数值。
The effect of different energy(keV)of high-energy electron on the results of microbial D10 test was compared,and the D10 values of Bacillus atrophicus and Bacillus pumilus were determined.Through the small-scale test,the energy(keV)and dose(kGy) of sterilization of PET bottles by high-energy electron external irradiation were determined,and the microbial challenge test was carried out.In the established industrial device,the dose and killing Log Value of each part of the inner wall of the target bottle after high-energy electronic treatment were measured.The results show that under the selected sterilization process conditions,the Killing Log Value of 6 log can be achieved for the indicator bacteria spore when the PET bottle is sterilized by high-energy electronic.
作者
张国宏
陆健锋
于丽坤
谢骏琦
ZHANG Guo-hong;LU Jian-feng;YU Li-kun;XIE Jun-qi(Jiangsu Newamstar Packaging Machinery Co.,Ltd.Zhangjiagang 215618,China)
出处
《饮料工业》
2020年第5期52-61,共10页
Beverage Industry
关键词
高能
电子
PET
瓶
容器
杀菌
辐射
high energy
electron
PET
bottle
container
sterilization
irradiation