汕头数据中心智能通道及万能底座研究

Research on Smart Channel and Universal Base of Shantou Data Center

随着5G网络的快速部署,数据、核心、传输各专业硬件IT化、高集成化,致使单机柜功耗越来越大,最大功率已趋近30 kW。汕头数据中心旧机房的基础配套设施难以解决主设备局部热点、冷量利用率低、不规则机架安装繁琐等问题。机房高功耗、高耗电、低PE值已成为运维的痛点,文章探讨如何通过采用智能通道、设备解耦、万能底座等技术,制定出一套高效支撑汕头数据中心安全高效、节能省电的运维模式,同时满足各专业不规则机架快速安装场景的需求。

With the rapid deployment of 5g network,the data,core,transmission professional hardware it,high integration,resulting in the single cabinet power consumption is increasing,the maximum power has approached 30kW.It is difficult to solve the problems such as local hot spot of main equipment,low utilization rate of cooling capacity and complicated installation of irregular rack in old computer room of Shantou data center.The high power consumption,high power consumption and low PE value of the computer room have become the pain points of operation and maintenance.This paper discusses how to develop a set of operation and maintenance mode with high efficiency,energy saving and power saving to support Shantou data center by using intelligent channel,equipment decoupling,universal base and other technologies,and at the same time,it can meet the needs of various professional irregular rack rapid installation scenarios.