1Natsumeda S, Miyoshi T. Numerical simulation of engagement of paper based wet cutch facing [J]. Journal of Tribology, 1994, 116(2): 232-237.
2Berger E J, Sadeghi F, Krousgrill C M. Finite ele- ment modeling of engagement of rough and grooved wet clutches [J]. Journal of Tribology, 1996, 118 (1) : 137-146.
3Yang Y B, Lam R C, Fujii T. Prediction of torque response during the engagement of wet friction clutch [R]. Michigan: SAE Technical Paper, 1998.
4Gao H, Barber G C, Shillor M. Numerical simulation of engagement of wet clutch with skewed surface roughness[J]. Journal of Tribology, 2002, 124(2) : 305-312.
5Davis C L, Sadeghi F, Krousgrill C M. A simplified approach to modeling thermal effects in wet clutch engagement: analytical and experimental comparison [J]. Journal of Tribology, 2000, 122(1) : 110-118.
6Marklund P, Sahlin F, Larsson R. Modelling and simulation of thermal effects in wet clutches operat- ing under boundary lubrication conditions[J]. Pro- ceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009, 223: 1129-1141.
7Marklund P, Maki R, Larsson R. Thermal influence on torque transfer of wet clutches in limited slip dif- ferential applications [J]. Tribology International, 2007, 40(5): 876-884.
8Mansouri M, Holgerson M, Khonsari M M, et al. Thermal and dynamic characterization of wet clutch engagement with provision for drive torque[J]. Jour- nal of Tribology, 2001, 123(2) : 313-323.
9Jang J Y, Khonsari M M, Maki R. Three-dimension- al thermohydrodynamic analysis of a wet clutch with consideration of grooved friction surfaces[J]. Tribol- ogy International, 2011, 133(1): 0117031-12.
10Patir N, Cheng H S. Application of average flow model to lubrication between rough sliding surface [J]. ASME Journal of Lubrication Technology, 1979, 101: 220-229.
