期刊文献+

数控机床加工精度技术提升探究

Research on Improving Machining Accuracy of CNC Machine Tools
下载PDF
导出
摘要 现阶段,随着世界科技水平的不断提升,数控机床的自动化程度也随之增高,并且加工制造的数控产品及质量可靠性程度也相对较高,在产品的柔韧性方面也表现的较为突出,因此在实际生产制造过程中被很多制造企业所青睐。随着人们对制作企业产品质量要求的提高,企业对数控机床加工精度技术的要求也随之提高。本文以此为出发点,对数控机床加工精度提高技术做出详细研究。 At this stage,with the continuous improvement of the world's scientifi c and technological level,the degree of automation of CNC machine tools is also increased,and the CNC products and quality reliability of processing and manufacturing are relatively high,and the flexibility of products is also more prominent,so it is favored by many manufacturing enterprises in the actual production and manufacturing process.With the improvement of product quality requirements of manufacturing enterprises,the requirements of CNC machining accuracy technology are also improved.This paper takes this as the starting point,makes a detailed study on the technology of improving the machining accuracy of CNC machine tools.
作者 赵庆 Zhao Qing
出处 《今日自动化》 2020年第7期22-24,共3页 Automation Today
关键词 数控机床 加工精度 提高措施 CNC machine tools machining accuracy improvement measures
  • 相关文献

参考文献6

二级参考文献27

  • 1唐健钧,贾晓亮,田锡天,耿俊浩.面向MBD的数控加工工艺三维工序模型技术研究[J].航空制造技术,2012,55(16):62-66. 被引量:23
  • 2曲智勇,陈维山,姚郁.导轨几何误差辨识方法的研究[J].机械工程学报,2006,42(4):201-205. 被引量:11
  • 3Hocken R, Simpson, A J,et al. Three dimensional metrology [J]. Annals of the CIRP, 1977,26(2) :403 -408.
  • 4Ferreira P M, Liu C R. An analytical quadratic model for the geometric error of a machine tool [ J]. Journal of Manufacturing Systems, 1986,5(1) :51 -63.
  • 5Yang S, Yuan J, Ni J. The improvement of thermal error modeling and compensation on machine tools by CMAC neural network [ J ]. International Journal of Machine Tools and Manufacture, 1996,36(4) :527 - 537.
  • 6Zhang G, Ou Yang R, Lu B. A displacement method for machine geometry calibration [ J ]. Annals of the CIRP, 1988,37(1 ) :515 -518.
  • 7Chen G Q, Yuan J X, Ni J. A displacement measurement approach for machine geometric error assessment [ J]. International Journal of Machine Tools & Manufacture, 2001,41 (1) : 149 - 161.
  • 8赵新杰.数控机床加工效率的影响因素及提升措施探讨[J].科技展望,2015,19:66.
  • 9倪军.数控机床误差补偿研究的回顾及展望[J].中国机械工程,1997,8(1):29-33. 被引量:159
  • 10刘又午,刘丽冰,赵小松,章青,王树新.数控机床误差补偿技术研究[J].中国机械工程,1998,9(12):4852-4852. 被引量:158

共引文献63

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部