期刊文献+

坪上煤业2302工作面断层对防治水工作的影响研究

Study on the influence of fault on water control in 2302 working face of Pingshang Coal Industry
下载PDF
导出
摘要 山西晋煤集团坪上煤业有限公司由于奥灰突水的影响,目前矿井开采3号煤层属于带压开采,矿方通过突水公式计算出了其最大突水系数为0.040 MPa/m,虽小于临界突水系数,但在断裂构造附近存在发生突水的可能。为了保障2302工作面的安全生产,坪上煤业应用FLAC 3D软件就工作面与断层之间的关系,对应力集中程度与塑形破坏程度进行了模拟研究,在此基础上,矿方制定了防隔水煤柱留设方案及基本参数等防治水措施,开采过程中也没有出现异常突水等情况,对2302工作面高效安全的生产起到了良好的作用。 Due to the influence of Ordovician limestone water inrush in Pingshang Coal Industry Co.,Ltd.,at present,the mining of No.3 coal seam belongs to mining under pressure.The mine side calculated the maximum water inrush coefficient as 0.040 MPa/m through the water inrush formula,which is less than the critical water inrush coefficient,but there is the possibility of water inrush near the fault structure.In order to ensure the safety production of 2302 working face,Pingshang Coal Industry applied FLAC 3D software and simulated the relationship between working face and fault,stress concentration and plastic damage degree.On this basis,the mine formulated the water prevention and water prevention measures such as retaining scheme and basic parameters of water proof coal pillar.There was no abnormal water inrush in the mining process,which played a good role in the efficient and safe production of 2302 working face.
作者 张慕宇 ZHANG Muyu(Pingshang Coal Industry Co.,Ltd.,Jincheng Shanxi 048203,China)
出处 《山西化工》 2020年第6期79-82,共4页 Shanxi Chemical Industry
关键词 应力集中 突水系数 防治水措施 stress concentration water inrush coefficient water control measures
  • 相关文献

参考文献1

二级参考文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部