摘要
为解决电梯曳引轮与钢丝绳之间滑移不易定量检测的难题,提出了一种基于旋转编码器的滑移量检测系统。系统由硬件电路、软件设计和检测装置三部分组成,硬件电路完成了电源电路、串口通讯和编码器设计,系统软件设计完成对编码器信号进行接收、处理、转化和显示,滑移量检测装置完成基于旋转编码器的角位移测量。经测试结果表明:系统能够定量检测曳引轮滑移量,检测精度能够达到1mm,为开展电梯检验研究工作提供良好的技术支持。
To solve the problem of difficult quantitative measurement of slip between traction sheave and wire rope,a sliding measurement system based on rotary encoder is proposed.The system consists of hardware circuit,software design and detection device.The hardware circuit completes the power circuit,serial port communication and encoder design.The system software design completes the reception,processing,transformation and display of encoder signals.The test results show that the system can quantitatively detect the slip amount of the traction sheave and the detection accuracy can reach 1mm,which provides good technical support for carrying out the elevator inspection.
作者
陈本瑶
俞平
陈辉
冯渊明
陈家焱
Chen Benyao;Yu Ping;Chen Hui;Feng Yuanming;Chen Jiayan(Huzhou Special Equipment Inspection Center,Huzhou 313000;China Jiliang University,Hangzhou 310018)
出处
《中国特种设备安全》
2020年第12期89-93,111,共6页
China Special Equipment Safety
基金
湖州市科学技术局公益技术研究项目(2018GZ04)。
关键词
电梯
曳引轮
单片机
滑移量检测
Elevator
Traction sheave
Single chip microcomputer
Slip detection