摘要
发变组保护在机组停运后应该正常投入,特别是发变组保护中的误上电和启停机保护,在发变组解列前就应该将其投入,发电机停运后一旦发生对发电机进行反送电的事故,发变组保护会动作于发变组出口断路器使其迅速跳开,使发变组免受伤害。
The generator-transformer protection should be put into normal operation after the unit is out of service,especially the inadvertent energizing and start-stop protection in the generator-transformer protection.It should be put into operation before the generator-transformer unit is disconnected.Once the generator is out of service,if there is an accident that reverses the transmission of power to the generator,the generator-transformer unit protection will act on the generator-transformer outlet circuit breaker to quickly open it,so that the generator-transformer unit is protected from damage.
作者
李斌
LI Bin(Sanhe Power Generation Co.,Ltd.,Langfang 065201,China)
出处
《价值工程》
2020年第35期184-186,共3页
Value Engineering
关键词
发变组
误上电保护
启停机保护
压板
generator-transformer group
inadvertent energizing protection
start-stop protection
pressure plate