期刊文献+

Flow Control for a Two-Stage Proportional Valve with Hydraulic Position Feedback 被引量:6

下载PDF
导出
摘要 The current research mainly focuses on the flow control for the two-stage proportional valve with hydraulic position feedback which is named as Valvistor valve.Essentially,the Valvistor valve is a proportional throttle valve and the flow fluctuates with the change of load pressure.The flow fluctuation severely restricts the application of the Valvistor valve.In this paper,a novel flow control method the Valvistor valve is provided to suppress the flow fluctuation and develop a high performance proportional flow valve.The mathematical model of this valve is established and linearized.Fuzzy proportional-integral-derivative(PID)controller is adopted in the closed-loop flow control system.The feedback is obtained by the flow inference with back-propagation neural network(BPNN)based on the spool displacement in the pilot stage and the pressure differential across the main orifice.The results show that inference with BPNN can obtain the flow data fast and accurately.With the flow control method,the flow can keep at the set point when the pressure differential across the main orifice changes.The flow control method is effective and the Valvistor valve changes from proportional throttle valve to proportional flow valve.For the developed proportional flow valve,the settling time of the flow is very short when the load pressure changes abruptly.The performances of hysteresis,linearity and bandwidth are in a high range.The linear mathematical model can be verified and the assumptions in the system modeling is reasonable.
出处 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2020年第6期64-76,共13页 中国机械工程学报(英文版)
基金 Supported by National Natural Science Foundation of China(Grant No.51805350) Key Technologies Research and Development Program of China(Grant No.2018YFB2001202) Natural Science Foundation of Shanxi Province of China(Grant No.201801D221226) Postdoctoral Science Foundation of China(Grant No.2019M651073).
  • 相关文献

参考文献7

二级参考文献67

  • 1Xi-jun Yang,Xiang-jun Zhang,You-min Gong.Starting Characteristics of Motor in Inverter-Motor Drive System[J].Advances in Manufacturing,2000(2):140-144. 被引量:1
  • 2ZHANG Yanting WANG Qingfeng XIAO Qing FU Qiang.CONSTANT WORK-POINT CONTROL FOR PARALLEL HYBRID SYSTEM WITH CAPACITOR ACCUMULATOR IN HYDRAULIC EXCAVATOR[J].Chinese Journal of Mechanical Engineering,2006,19(4):505-508. 被引量:4
  • 3Boschrexroth Product Catalog. Components for hydraulic servo and proportional system[M]. RC29 110/5.84:145- 152.
  • 4LU Yongxiang, HU Dahong. Electro-hydraulic proportional technology[M]. Beijing: China Machine Press, 1988. (in Chinese) .
  • 5HIROSHI I, TOSHIO H M. Hydraulic equipment to meet the needs of mechatronics age[J]. Journal of the Japan Hydraulics and Pneumatics Society, 1987, 18 (5): 363-369.
  • 6LIN Junjie, WENG Zhentao. Pilot controlled proportional spool valve with bidirectional pressure difference feedback: China, 02110594.4[P]. 2002-02-18. (in Chinese).
  • 7HORST H, RE1NER K, WOLFGANG B. Electronic proportional valve for working hydraulics of combine[J]. Oelhydraulik und Pneumatik, 1997, 41(10): 733-737. (in Germany).
  • 8KARLPETER S. Mobile hydraulic with CAN-Bus[J]. Oelhydraulik undPneumatik, 1997, 41(4): 296-300. (in Germany).
  • 9MAXIM R. Piezoelectric actuator used in pilot controlled high dynamic servo valve[J]. Oelhydraulik und Pneumatik, 2007, 51(1-2): 22-26. (in Germany).
  • 10ALFRED F, TORSTEN W. New type and cost favorable driver for hydraulic proportional valve[J]. Oelhydraulik und Pneumatik, 1999, 43(4): 258-260. (in Germany).

共引文献50

同被引文献69

引证文献6

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部