期刊文献+

在线测量不确定度评估及质量控制应用

Online-Measurement Uncertainty Evaluation&Quality Control Application
下载PDF
导出
摘要 在线测量是质量控制的重要手段,但实际过程中对于测量误差的忽视容易导致误判和漏判,因此需要采用可靠的方法评估测量误差对过程质量控制的影响。以某发动机工厂在线测量的曲轴线终检机为例,通过研究测量系统的结构和测量原理,分析测量误差的构成和分量,建立测量误差数学模型,评估曲轴终检机的测量不确定度。阐述考虑测量不确定度条件下的质量控制规则,在此基础上可以实现有效的过程质量控制。 Online measurement is an important tool of quality control,but neglecting the measuring error of process easily leads to misjudgment,therefore a reliable method is required to assess the effect of measurement error on process quality control.In this paper,we take the crankshaft line final inspection machine of an engine plant online measurement is taker as an example,to analyze the structure and component of measurement errors based on the study of structure and measuring principle of measurement system,the mathematical model of the measurement error is established,to evaluate measurement uncertainty of the crankshaft final inspection machine.The quality control rule based on consideration of measurement uncertainty is elaborated,and effective process quality control can be realized on this basis.
作者 严宇波 黄琳 Yan Yubo;Huang Lin(SAIC GM Wuling Automobile Co.,Ltd.,Liuzhou 5450007)
出处 《汽车工艺与材料》 2021年第2期63-67,共5页 Automobile Technology & Material
关键词 在线测量 测量误差 不确定度评估 质量控制 Online measurement Measuring error Uncertainty evaluation Quality control
  • 相关文献

参考文献3

二级参考文献14

  • 1彭和平,蒋向前,徐振高,刘晓军.新一代产品几何技术规范测量不确定度理论及应用技术[J].中国机械工程,2006,17(24):2535-2539. 被引量:6
  • 2杜仲廉,计量技术,1987年
  • 3费业泰,误差理论与数据处理,1987年
  • 4王润,金属材料物理性能,1982年
  • 5Macii D,Petri D. An Effective Method to HandleMeasurement Uncertainty in Conformance TestingProcedures [ C]//2007 IEEE International Work-shop on Advanced Methods for Uncertainty Esti-mation in Measurement. Sardagna, 2007 :69-73.
  • 6Macii D,Petri D. Guidelines to Manage Measure-ment Uncertainty in Conformance Testing Proce-dures [J]. IEEE Transactions on Instrumentationand Measurement,2009,58(1) : 33-40.
  • 7Chen J F,Hu Q P. Misjudgment Probability andQuality Control of Manufacture [C]//2011 ThirdInternational Conference on Measuring Technologyand Mechatronics Automation. Shangshai,2011 :564-567.
  • 8Desimoni E,Brunetti B. Uncertainty of Measure-ment and Conformity Assessment a Review [J].Analytical and Bioanalytical Chemistry, 2011,400(6):1729-1741.
  • 9Pendrill L R. Using Measurement Uncertainty inDecision- making and Conformity Assessment [J],Metrologia,2014,51(4) :S206.
  • 10Theodorou D,Zannikos F. The Use of MeasurementUncertainty and Precision Data in Conformity As-sessment of Automotive Fuel Products [J]. Meas-urement,2014 ,50:141-151.

共引文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部