摘要
依据国家汽车制动系统行业相关标准研制汽车制动钳滑移阻力检测系统。以行业标准和企业测试要求为依据,制定活塞滑动阻力测试方案,引入高精度数据采集、伺服精密加载控制、测量系统分析等技术,设计基于伺服运动控制的精密加载机构的测量装置、采用真空泵用来对系统抽真空实现系统自动可调节的真空源,利用气液增压器、电气比例阀来满足对气液源的精准控制,设计一套汽车制动钳滑移阻力性能检测系统,满足其关于密封特性、滑动阻力特性的检测和评估,并对测试系统进行重复性评价。功能项测量能力指数满足Cg≥2.0,该检测系统稳定性能好、测量精度高,满足性能测试要求。
Based on the relevant standards of the national automotive brake system industry, detection system for sliding resistance of automobile brake caliper was developed. Based on industry standards and enterprise test requirements, piston sliding resistance test plan formulation, the introduction of high-precision servo precision load control, data acquisition, measurement system analysis, design of load mechanism based on the precision of the servo motor control measurement device, vacuum pump used for vacuum system was adopted to realize the system automatically adjustable vacuum source, the use of gas and liquid supercharger, electric proportional valve to meet the precise control of gas and liquid source, has developed a set of slip resistance comprehensive performance test system, to achieve its seal, piston sliding resistance properties of testing and evaluation, and evaluation system of the test. The test results show that the measurement ability index(C_g) of test items is larger than 2.0, the system has stable detection performance and high precision, and meets the test requirements.
作者
洪黎明
王学影
胡晓峰
范伟军
HONG Liming;WANG Xueying;HU Xiaofeng;FAN Weijun(China Jiliang University,Hangzhou 310018,China;Hangzhou Wolei Science&Technology Co.,Ltd.,Hangzhou 310019,China)
出处
《中国测试》
CAS
北大核心
2021年第1期105-110,共6页
China Measurement & Test
基金
国家自然科学基金项目(51675499)
浙江省科技计划项目重大科技专项(2018C01063)。
