婴儿辐射保暖台质控检测研究及实践

Research and Practice on Quality Control of Infant Radiant Warmer

目的结合医院实际使用及管理情况,制定针对婴儿辐射保暖台质控检测内容,提高婴儿辐射保暖台应用质量。方法根据婴儿辐射保暖台设计原理,通过人工检查和使用设备质控方式,对婴儿辐射保暖台进行仪器外观、开机检查、温度、辐照强度、噪音、定时器共6个方面的质量控制检测。结果制订了相应的质控检测工作表并应用于实际工作中,包括每2 min记录所有测量点的温度及婴儿辐射保暖台的显示温度;当婴儿辐射保暖台报警时,在距设备前部3 m处测量3次并记录,平均值不低于65 dB;检测婴儿辐射保暖台在最后10 s时记录是否有提示声音。结论婴儿辐射保暖台质控制检测可指导设备顺利运行,同时根据质控工作结果改进管理办法,不仅可以使质量检测工作更为高效有序,也可以提高婴儿辐射保暖台的运行质量。

Objective Based on the actual use and management of the hospital,the content of quality control and testing for the infant radiant warmer is formulated to improve the application quality.Methods According to the design principle of infant radiant warmer,through manual inspection and the use of equipment quality control methods,the appearance,boot inspection,temperature,radiation intensity,noise and timer of infant radiant warmer were tested.Results The corresponding quality control and detection worksheet was developed and applied in the actual work,including recording the temperature of all measured points and the display temperature of the infant radiant warmer every 2 min;When the infant radiant warmer alarmed,measure 3 times at 3 m away from the front of the equipment and recored,the average value was no less than 65 dB.detected if the baby radiating thermals record a sound cue at the last 10 s.Conclusion The quality control test of infant radiant warmer can guide the smooth operation of the equipment.At the same time,improving the management method according to the quality control results can not only make the quality testing more efficient and orderly,but also improve the operation quality of infant radiant warmer.