吊瓶加热自呼监控系统的研究

Research on Self-Calling Monitoring System for Heating of Bottles

目前,传统输液过程中,经常会遇时间过久而没有注意药液剩余情况,导致未及时更换药瓶或者拔针使空气流入,导致病人的生命受到威胁,并且在冬天的时候都因为温度太低导致液体较冰凉,病人输液时手部裸露在外,使得输液效果不明显,甚至会导致病情加重。因此,本设计为一种能够对剩余药液监控警报并同时对手部进行加热的输液系统,将解决传统输液时的一些问题本设计是在输液管上添加报警装置,在支架上安装暖手装置,将这些结合成为新型吊瓶加热自呼监控系统,可有效解决目前上常见的输液所存在的一些弊端。

At present,in the traditional infusion process,it often takes too long to pay attention to the remaining liquid medicine,resulting in failure to replace the medicine bottle in time or draw the needle to cause air to flow in,which causes the patient’s life to be threatened,and the temperature is too high in winter Low causes the liquid to be colder,and the patient’s hands are exposed during infusion,making the infusion effect insignificant and even worsening the condition.Therefore,the original design is an infusion system that can monitor and alert the remaining liquid medicine and heat the hand at the same time,which will solve some of the problems of traditional infusion.The design is to add an alarm device to the infusion tube and install a hand warmer on the bracket,Combining these into a new type of bottle heating self-calling monitoring system can effectively solve some of the drawbacks of the current common infusions.