期刊文献+

微纳米气泡处理印染退浆废水

Treatment of desizing wastewater by micro-nano bubble
下载PDF
导出
摘要 采用微纳米气泡法处理淀粉浆模拟废水,探究温度、pH、作用时间对淀粉浆分解率及COD去除率的影响。结果表明:在无任何助剂、温度80℃、pH 9左右、时间40 min的条件下,淀粉浆分解率为35.9%,COD去除率为28.9%。 The simulated wastewater of starch slurry was treated by micro nano bubble method.The effect of temperature,pH and reaction time on the decomposition rate of starch slurry and COD removal rate were investigated.The test showed that under the conditions of no additives,temperature 80℃,pH about 9 and time 40 min,the decomposition rate of starch slurry was 35.9%and the COD removal rate was 28.9%.
作者 张旭芳 王开苗 李育博 赵洪国 ZHANG Xufang;WANG Kaimiao;LI Yubo;ZHAO Hongguo(Zibo Key Laboratory of Bio-Based New Materials,Shandong Light Industry Vocational College,Zibo 255300,China;Tianhong Environmental Technology Co.Ltd.,Zibo 255300,China;Zhejiang Kefeng Silicone Co.Ltd.,Hangzhou 310018,China)
出处 《染整技术》 CAS 2021年第2期41-43,共3页 Textile Dyeing and Finishing Journal
基金 淄博市校城融合项目(2018ZBXC383) 淄博市重点研发计划(校城融合发展类,2019ZBXC467)。
关键词 微纳米气泡 淀粉浆 印染废水 micro nano bubbles starch slurry dyeing and finishing waste water
  • 相关文献

参考文献3

二级参考文献39

共引文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部