Microstructure and texture optimization by static recrystallization originating from {10-12} extension twins in a Mg-Gd-Y alloy

During the deformation of Mg alloys,{10-12} extension twin often contributes to the formation of basal texture but rarely assists the nucleation of recrystallization,i.e.,effective grain refinement,therefore it seems to make against the improvement of formability and mechanical properties.In this work,{10-12} extension twin has been creatively utilized as a preference nucleation site for static recrystallization(SRX),achieving grain refinement and orientation randomization in a Mg-Gd-Y alloy using multi-directional impact forging(MDIF)and subsequent annealing treatment.Effect of {10-12} extension twin on SRX behavior has been investigated by annealing treatment at 450℃ using quasi-in-situ optical microscopy(OM)and quasi-in-situ electron back-scattering diffraction(EBSD).The microstructural evolution during annealing shows that several SRX gains can nucleate from the grain boundary of untwinned grains,but they only have few influences on the final microstructure due to their limited volume faction and sluggish growth.In contrast,a large number of SRX gains can initiate from {10-12} extension twin and grow up without the confine of twin boundaries.Finally,they consume their parent grains and make the main contribution to grain refinement.This should be attributed to those pinned {10-12} twin boundary,by interacting with various dislocation slips during the MDIF process,which can operate like grain boundary,store enough strain energy,and promote the nucleation of SRX during annealing.On the other hand,SRX grains usually keep initial random orientation and further randomize the forging texture during annealing treatment.