摘要
为研究双进水管结构工况不同布设位置对海水循环水矩形圆弧角养殖池池底水动力特性的影响,基于RNG k-ε湍流模型,应用计算流体力学仿真技术,对双进水管结构工况下6种不同布设位置的养殖池内部流场进行三维数值模拟,采用流体动力学特征量重点分析排污口附近复杂的流场形态。研究结果表明:双进水管结构中进水管的布设位置对养殖池底部流速分布影响显著,双进水管均布设在圆弧角位置是优选布设,有利于改善养殖池底部水动力特性。
In order to research the influence on the hydrodynamic characteristics of single-drain marine aquaculture tank with different double-inlet pipes distances,especially the velocity distribution of the bottom and near discharge outlets.The RNG k-εturbulence model was applied to simulation the flow field in rectangular arc angle aquaculture tank,the computational fluid dynamics study is performed to analyze the impact of different layout positions under double-inlet pipes structure conditions on the flow field of the tank,and the fluid dynamics characteristics variables were adopted to analyze the complex the flow field in the near of sewage outlet.The results indicate that the position of the inlet pipe in the double-inlet pipe structure has a significant influence on the velocity distribution at the bottom of the tank;the double-inlet pipes at the arc angle is conducive to improve the hydrodynamic characteristics at the bottom of the tank.
作者
任效忠
薛博茹
姜恒志
于林平
许条建
马真
史宪莹
REN Xiao-zhong;XUE Bo-ru;JIANG Heng-zhi;YU Lin-ping;XU Tiao-jian;MA Zhen;SHI Xian-ying(Dalian Ocean University,Dalian 116023,China;Key Laboratory of Environment Controlled Aquaculture,Ministry of Education,Dalian 116023,China;National Marine Environmental Mornitoring Center,Dalian 116023,China;State Key Laboratory of Coastal and Offshore Engineering,Dalian University of Technology,Dalian 116024,China)
出处
《海洋环境科学》
CAS
CSCD
北大核心
2021年第1期50-56,共7页
Marine Environmental Science
基金
国家自然科学基金面上项目(31872609)
自治区(新疆)重点研发计划项目(2017B01004-2)
国家重点研发计划项目(2017YFD0701701)
广东省重点领域研发计划项目(2019B020215001)
大连理工大学海岸和近海工程国家重点实验室开放基金项目(LP1818)
辽宁省高等学校海洋产业技术研究院项目(2018-CY-24)。
关键词
计算流体力学技术
矩形圆弧角养殖池
双进水管
水动力特性
computational fluid dynamics
rectangular arc angle aquaculture tank
double-inlet pipe
the hydrodynamic characteristics