摘要
文章分析了目前产品轻量化设计的现状,以某曲柄臂结构为研究对象,应用有限元分析软件进行了静力学求解,并基于其静力学结果对研究对象的结构进行了拓扑优化,依据优化结果对曲柄臂进行验证,通过改变对曲柄臂加强筋的厚度静应力对比分析表明,在满足刚度和强度条件下,曲柄臂的质量减少了4.1%,同时进行疲劳验证,该研究可为曲柄臂轻量化可靠性设计提供理论指导。
The article analyzes the current status of lightweight design of products,taking a crank arm structure as the research object and using finite element analysis software to solve the problem based on the statics results,topological optimization of the structure of the research object based on its statics results.The results were verified for the crank arm based on the data results.The comparative analysis of the thickness of the crank arm stiffeners by changing the static stress showed that the mass of the crank arm was reduced by 4.1%under the conditions of rigidity and strength.At the same time,part fatigue verification is carried out,lightweight and reliable design provide theoretical guidance.
作者
张明松
庄桥
王恩恒
肖锦志
Zhang Mingsong;Zhuang Qiao;Wang Enheng;Xiao Jinzhi(College of Mechanical&Power Engineering China Three Gorges University,Hubei Yichang 443002)
出处
《南方农机》
2021年第5期60-61,68,共3页
关键词
有限元分析
数学建模
拓扑优化
疲劳分析
Finite element analysis
Mathematical model establishment
Topology Optimization
Fatigue analysis