基于STM32的车灯控制检测系统开发

Development of Inspection System for Car Light Quality based on STM32

随着汽车行业的蓬勃发展,对汽车车灯也提出了更高的要求,车灯的质量在这些要求中占据重要的作用,而如何检测车灯的质量就成为了当今世界的一个重要命题。基于此,开发了一套基于STM32的汽车车灯质量检测系统,该系统依靠高性能的STM32系列芯片设计了车灯检测系统控制器,同时应用LIN总线技术实现了检测系统和车灯之间的通信,以车灯的各种状态为标准来对车灯的质量进行性能测试,其中软件的编写也十分重要,利用中断和全局变量设计的程序非常巧妙,使整个系统的稳定性良好。最后利用检测系统来控制车灯呈现相应的状态试验检测车灯质量,并经过对大批次车灯的质量检测结果显示,车灯质量检测系统能够高效率地完成车灯的检测工作,具有极高的可靠性和广泛的应用前景。

With the vigorous development of the automobile industry,higher requirements have been put forward for automobile lights.The quality of automobile lights played an important role in these requirements,and how to detect the quality of automobile lights has becoming an important issue in the contemporary world.Based on this,a set of STM32-based automotive lamp quality inspection system was developed.The system relied on the high-performance STM32 series chips to design the automotive lamp detection system controller,and at the same time,used LIN bus technology to realize the communication between the detection system and the lamp,carried out performance test on the quality of the car lights based on the various states of the car lights,among of that,the writing of software was also very important,and the program designed with interrupts and global variables was very clever,so that the stability of the entire system was good.Finally,the inspection system was used to control the car lights to present the corresponding state to test the quality of the car lights,and the quality inspection results of the large batch of car lights showed that the car light quality inspection system could efficiently complete the inspection work of the car lights,it had very high reliability and wide application prospects.