期刊文献+

行星线齿变速器基于装配误差的传动精度分析 被引量:4

Transmission Precision Analysis of Planetary Line Gear Transmission based on Assembly Error
下载PDF
导出
摘要 针对一种以线齿轮为核心传动元件的行星线齿变速器,研究了装配误差对其传动精度的影响。介绍了该行星线齿变速器的结构组成及不同传动方案的特点,建立了轮系空间啮合坐标系,以及啮合时线齿行星轮、线齿太阳轮以及外线齿圈的参变量之间的定量关系;分析了外线齿圈与线齿行星轮之间以及线齿行星轮与线齿太阳轮之间的角度误差和位移误差的产生原因,并采用齿面接触分析方法(TCA),对行星线齿变速器的装配误差模型进行了数值分析。结果表明,在行星线齿变速器的装配中,绕水平轴旋转的角度误差、外线齿圈纵截面内的位移误差以及线齿行星轮横截面内的位移误差,对传动精度有较大影响。研究对该行星线齿变速器的设计和装配具有指导意义。 Focusing on a planetary gear transmission that uses line gear as core transmission elements,and the influence of assembly errors on its transmission precision is studied.The structural composition of the line gear transmission and the characteristics of different transmission schemes are analyzed,the space meshing coordinate system for the gear train are established,and the quantitative relationship of the parameters at the meshing moment is established among the sun line gear,the outer ring line gear and the planetary line gear.The causes of the angle error and displacement error are analyzed,both between the planetary line gear and the sun line gear and between the outer ring line gear and the planetary line gear.Tooth Contact Analysis(TCA)is subsequently adopted to carry out the numerical analysis of the assembly errors model for the line gear transmission.The results show that,among assembly errors of the planetary gears,the angular errors of its rotation around the horizontal axis,the displacement errors in the longitudinal section of the outer ring line gear,and the displacement errors in the cross section of the planetary line gear,are of more effect on its transmission.That is of significant to design and assembly of the planetary gears.
作者 耿婷 韦玉庭 邓爱平 丁江 Geng Ting;Wei Yuting;Deng Aiping;Ding Jiang(College of Mechanical Engineering,Guangxi University,Nanning 530004,China;Guangxi Key Laboratory of Manufacturing System&Advanced Manufacturing Technology,Nanning 530004,China;Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China)
出处 《机械传动》 北大核心 2021年第3期104-110,共7页 Journal of Mechanical Transmission
基金 国家自然科学基金(51905113) 广西自然科学基金(2017GXNSFBA198233) 广西制造系统与先进制造技术重点实验室主任课题(16-380-12S002) 2019年教育部中西部高等学校青年骨干教师国内访问学者项目广西研究生教育创新计划资助项目(YCSW2020018)。
关键词 线齿轮 变速器 装配误差 传动精度 Line gear Transmission Assembly error Transmission precision
  • 相关文献

参考文献7

二级参考文献59

  • 1王三民,袁茹,陈作模.弧齿锥齿轮计及误差的轮齿接触分析[J].西北工业大学学报,1994,12(2):164-168. 被引量:11
  • 2唐进元,雷国伟,杜晋,卢延峰.螺旋锥齿轮安装误差敏感性与容差性研究[J].航空动力学报,2009,24(8):1878-1885. 被引量:24
  • 3陈建宇,茅元新,孙麟治.微小机械的研究现状和动向[J].光学精密工程,1994,2(6):1-6. 被引量:5
  • 4王玉芳,童忠钫.齿轮的误差对啮合冲击的影响[J].振动与冲击,1994,13(2):14-19. 被引量:3
  • 5Yang Ping,Liao Ningbo.Surface sliding simulation in micro-gear trainfor adhesion problem and tribology design by using molecular dynamicsmodel[J].Computational Materials Science,2007,38(4):678-684.
  • 6Kwak S S,Mou J I.Huang S R S.Kinematics and dynamics of a microparallel-link mechanism[J].Microsystem Technologies,2004(4):293-306.
  • 7Cao S Y,Zheng J J,Wang B L,et al.A micro-position system of a gi-ant magnetostrictive actuator[J].Proceedings of the Eigth InternationalConference on Electrical Machines and Systems,2005(3):2316-2319.
  • 8He Zhimin,Loh Hantong,Xie Min.A two-dimensional probability mod-el for evaluating reliability of piezoelectric micro-actuators[J].Interna-tional Journal of Fatigue,2007(2):245-254.
  • 9Chen Yangzhi,Xiang Xiaoyong,Luo Liang.A Corrected Equation ofSpace Curve Meshing[J].Mechanism and Machine Theory,2009(44):1348-1359.
  • 10陈扬枝,陈祯,傅小燕,等.一种斜交齿轮机构:中国,2010201008064.0[P].2010-03-02.

共引文献74

同被引文献39

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部