摘要
针对金属带锯床调试成本高、故障维修难的问题,应用MCGS平台设计开发金属带锯床状态监控与故障报警系统,分别对设计手动联机、手动脱机、自动联机、自动脱机、IO监测等工况进行了检测,通过分析输入输出数据对故障进行诊断,并指明维护路径,最后介绍了组态脚本代码的编写及程序调试等。经测试,所开发的金属带锯床状态监控与故障报警系统实现了多工况监控与故障检测,界面友好,操作简单,有效降低了故障检测与维护成本。
Aiming at the problems of high debugging cost and difficult maintenance of metal band sawing machine,the MCGS platform is used to design and develop the state monitoring and fault alarm system of metal band sawing machine.The design of manual online,manual offline,automatic online,automatic offline,IO monitoring and other working conditions were carried out.By analyzing the input and output data to diagnose the fault and indicate the maintenance path,this paper introduces the writing of configuration script code and so on.After testing,the developed metal band saw machine state monitoring and fault alarm system realizes multi-working condition monitoring and fault detection,friendly interface,simple operation,and effectively reduces the cost of fault detection and maintenance.
作者
杨婧
游张平
胡庆鹏
林洪兵
徐枫燕
YANG Jing;YOU Zhangping;HU Qingpeng;LIN Hongbing;XU Fengyan(School of Engineering,Lishui University,Lishui,Zhejiang Province,323000 China)
出处
《科技资讯》
2021年第1期103-105,共3页
Science & Technology Information
基金
国家级大学生创新创业训练计划(项目编号:201910352013)
国家级大学生创新创业训练计划(项目编号:202010352014)
浙江省自然科学基金(项目编号:LY20E 050002)。
关键词
MCGS
金属带锯床
状态监控
故障诊断
故障维护
MCGS
Metal band sawing machine
Condition monitoring
Fault diagnosis
Fault maintenance
