摘要
电子枪聚焦透镜部件中电流所产生的电场及磁场的大小会影响电子束在加工工件上形成的束斑直径,影响电子束加工质量。为了更精确及真实反应电子束的运动情况,通过CST仿真软件对电子枪透镜部件来模拟整个电子束束流过程,在考虑不同因素对束斑的影响条件下进行分析,得出在不同像距下形成最佳电子束束斑尺寸的情况。为通过调控电流来实现焊接过程中最佳电子束束斑尺寸提供了可行的理论以及实践基础。
The size of the electric field and magnetic field produced by the current in the focusing lens of the electron gun will affect the beam spot diameter formed by the electron beam on the workpiece,and affect the processing quality of the electron beam. In order to reflect the motion of electron beam more accurately and truly,this paper analyzes the influence of different factors on the beam spot,simulates the whole process of electron beam through CST simulation software,and obtains the optimal size of electron beam spot under different image distance. It provides a feasible theoretical and practical basis for realizing the optimal size of electron beam spot in welding process by regulating current.
作者
李少林
刘明亮
崔本清
张晨阳
魏红燕
LI Shao-lin;LIU Ming-liang;CUI Ben-qing;ZHANG Chen-yang;WEI Hong-yan(School of Mechanical and Electrical Engineering,Guilin University of Electronic Science and Technology,Guilin Guangxi 541004,China)
出处
《装备制造技术》
2021年第1期1-4,10,共5页
Equipment Manufacturing Technology
基金
国家自然科学基金项目资助(项目编号:61741126)
广西制造系统与先进制造技术重点实验室主任基金(基金编号:14-045-15-011Z)。
