摘要
Wax obtained from the pyrolysis of polyethylene waste can contain inorganic contaminants and must be purified before application.We evaluated different filter aids(perlite,sand,and rice husk ash)for the filtration of a crude wax and a pyrolysis wax through a filter medium that was coated with nylon 6 nanofibers to improve filtration efficiency.We first examined the performance of the filter aids in improving crude wax filtration,with the filtration time,temperature,and pressure held constant at 1 h,170℃,and 2.5 bar,respectively.Oily wax was then produced by pyrolysis of high-density polyethylene(HDPE)waste in the temperature range 425-475℃.The best filter aid was perlite,which had a filtrate production rate of 5.47×10^(-5)m^(3)/h.The highest oily wax yield(87.8%)was achieved at a pyrolysis temperature of 425℃.The assembly comprising the filter medium coated with nylon 6 nanofibers plus perlite as a filter aid was most suitable for removing impurities from the oily wax generated by the HDPE pyrolysis as it achieved a purification efficiency of 99.9%.
基金
The authors are grateful for the financial support provided by CAPES(Brazilian Agency for Improvement of Graduate Personnel),CNPq(National Council of Scientific and Technological Develop-ment),FAPERGS(Foundation for Research Support of the State of Rio Grande do Sul),and SDECT(Department of Economic Develop-ment,Science and Technology of the State of Rio Grande do Sul).