期刊文献+

顶空-气相色谱质谱联用法(HS-GC-MS)测试组合聚醚中的氟利昂 被引量:1

Headspace-Gas Chromatography Mass Spectrometry (HS-GC-MS )Test for Freon in Polyether
下载PDF
导出
摘要 本实验样品经剪碎后准确称取,经顶空进样器进样后,用GCMS分析。依据目标化合物的保留时间和标准质谱图或特征离子定性定量,用内标法定量。实验表明,三种氟利昂回收率在100.5%~103.4%,线性范围好,HCFC-22、CFC-11和HCFC-141b最低检出限分别为0.014 mg/kg、0.002 mg/kg、和0.018 mg/kg,该方法可以有效的应用于水洗化妆品中硅氧烷类化合物进行定性和定量分析。能够有效地对组合聚醚中的氟利昂进行定性定量分析。 The sample in this experiment was accurately weighed after being cut,and then analyzed by GCMS after being injected by the headspace sampler.Qualitative and quantitative analysis was carried out based on the retention time of the target compound and standard mass spectra or characteristic ions,and it was quantified by internal standard method.Experiments showed that the recovery rates of the three kinds of freon were 100.5%~103.4%,and the linear range was good.The minimum detection limits of HCFC-22,CFC-11 and HCFC-141b were 0.014 mg/kg,0.002 mg/kg,and 0.018 mg/kg.This method can be effectively applied to qualitative and quantitative analysis of silicone compounds in washed cosmetics.It can effectively perform qualitative and quantitative analysis of freon in the combined polyether.
作者 徐嘉 张乾中 刘召贵 XU Jia;ZHANG Qian-zhong;LIU Zhao-gui(Jiangsu Skyray Instrument Co.,Ltd.,Jiangsu Kunshan 215300,China)
出处 《广州化工》 CAS 2021年第6期84-86,共3页 GuangZhou Chemical Industry
关键词 氟利昂 组合聚醚 顶空进样 色谱质谱联用 freon combined polyether headspace sampling chromatographic mass spectrometry
  • 相关文献

参考文献3

二级参考文献21

  • 1刘天成,宁平,王红斌,高红,马林转.MoO_3/ZrO_2催化分解氟利昂的工艺研究[J].环境工程,2009,27(S1):319-321. 被引量:4
  • 2张杰,翁汉元,吕国会,等.中国聚氨酯工业现状及未来发展展望[C].中国聚氨酯工业协会第十三次年会,20060902:1-11.
  • 3IAL Consultants.Polyurethane chemicals and production Europe,Middle East and Africa[R].Melbourne:IBIS World,2005.
  • 4UNEP/Ozone Secretariat,Nairobi.Rigid and Flexible Foams Technical Options Committee[R].2003,3.
  • 5Boutin M,Lesage J,Ostiguy C,et al.Identification of the isocyanates generated during the thermal degradation of a polyurethane car paint[J].J Anal AppI Pyrolysis,2004,71:791-802.
  • 6Boutin M,Lesage J,Ostiguy C,et al.Comparison of EI and metastable atom bombardment ionization for the identification of polyurethane thermal degradation on products[J].J Anal Appl Pyrolysis,2003,70:505-517.
  • 7Esperanza M M,García A N,Font R,et al.Pyrolysis of varnish wastes based on a polyurethane[J].J Anal Appl Pyrolysis,1999,52:151-166.
  • 8Bilbao R,Mastral J F,Ceamanos J,et al.Kinetics of the thermal decomposition of polyurethane foams in nitrogen and air atmospheres[J].J Anal Appl Pyrolysis,1996,37:69-82.
  • 9Potoczek M,Heneczkowski M,Oleksy M.A New Polyurethane Binder Providing High Green Strength of Drypressed Alumina[C].Ceram Int,2003,29:259-264.
  • 10Herrera M,Matuschek G,kettrup A.Thermal degradation of thermoplastic polyurethane elastomers (TPU) based on MDI[J].Polym Degrad Stabil,2002,78:323-331.

共引文献12

同被引文献10

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部