摘要
对比分析了GB/T 231.1—2009和GB/T 231.1—2018新旧标准中测量不确定度的评定方法,并采用新旧标准中的测量不确定度评定方法计算了Cr 12 MoV钢和标样布氏硬度的测量不确定度。结果表明:2018版标准中的方法较2009版的可以获得相对准确的测量不确定度,方法M2可以获得比方法M1更小的测量不确定度。
The evaluation methods of measurement uncertainty in GB/T 231.1—2009 and GB/T 231.1—2018 were compared and analyzed.The measurement uncertainty of Brinell hardness of Crl2 MoV steel and standard sample was calculated by using the measurement uncertainty evaluation method in the new and old standards.The results show that the method in the 2018 version standard could obtain relatively accurate measurement uncertainty compared with the method in the 2009 version.The measurement uncertainty of method M2 was smaller than that of method Ml.
作者
宋月
孙晓冉
赵中昱
邢承亮
SONG Yue;SUN Xiaoran;ZHAO Zhongyu;XING Chengliang(Physical and Chemical Testing Center,HBIS Group Research Institute,Shijiazhuang 050000,China)
出处
《理化检验(物理分册)》
CAS
2021年第2期41-44,共4页
Physical Testing and Chemical Analysis(Part A:Physical Testing)
关键词
测量不确定度
评定方法
布氏硬度试验
金属材料
measurement uncertainty
evaluation method
Brinell hardness test
metallic material