基于单片机的温湿度测量仪自动控制系统设计

该基于单片机的温湿度测量仪自动控制系统设计是以单片机作为主控制器,通过单片机控制各个模块实现相关功能。并且是通过温湿度传感器来检测对应环境的温湿度,然后进行信号转换,将信息传输给温度控制模块进行温度的调控,使所处环境调整至最佳温度,并且通过单片机将信号传输给蓝牙模块以及显示屏模块,使人们可直观了解到现处环境的温湿度值,从而可使人们针对情况采取相应措施。该设计以实现温湿度测量仪的功能为基础,根据所选择的设计模块对硬件电路和软件编程仿真进行结合设计,最后对温湿度测量仪进行检测验证,实现其功能。

The design of temperature and humidity measuring instrument automatic control system based on single-chip microcomputer takes single-chip microcomputer as the main controller,and through single-chip microcomputer controls each module to achieve related functions.And through the temperature and humidity sensor,this study detects the temperature and humidity of the corresponding environment,and then carries out signal conversion,and the information is transmitted to the temperature control module for temperature control,so that the environment can be adjusted to the best temperature;then the signal is transmitted to the Bluetooth module and the display module through the single-chip microcomputer,so that people can intuitively understand the temperature and humidity value of the current environment,so that people feel comfortable to take corresponding measures according to the situation.This design is based on the realization of the function of the temperature and humidity measuring instrument,and according to the selected design module,the hardware circuit and software programming simulation are designed.Finally,the temperature and humidity measuring instrument is tested and verified to realize its function.