装配式建筑结构构件配套模具设计组装技术

Design and Assembly Technology of Mould for Prefabricated Building Structural Components

装配式建筑结构构件的模具设计是预制构件生产的重要环节,传统的模具仅能配套对应的构件生产,重复利用率低,导致装配式建筑的成本居高不下,成为发展装配式建筑的重要瓶颈。通过最新的装配式构件模具设计,使用同一套模具不仅可以进行重复生产,还可以达到内外墙板、叠合板模具通用,大大降低了构件的模具成本。同时利用信息化技术,将构件生产所需模具和其他生产物料统一纳入生产计划中,实现构件的自动化生产。

The mould design of prefabricated building structural components is an important link in the production of prefabricated components.The traditional mould can only match the corresponding component production,and the reuse rate is low,which leads to the high cost of prefabricated building and becomes an important bottleneck in the development of prefabricated building.In this paper,through the latest Prefabricated component mould design,using the same set of mould can not only repeat production,but also achieve the common use of the same mould for internal and external wall panel and laminated plate mould,greatly reducing the cost of component mould.At the same time,using information technology,the mould and other production materials required for component production are unified into the production plan to realize the automated production of components.